Project manufacture product plastic jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    20,279 project manufacture product plastic jobs found, pricing in NZD

    Medicine sells

    $13 - $32
    $13 - $32
    0 bids
    Design a Logo 6 days left

    I want him to a LOGO for me Name: VePSA Taiwa It should be related to Automotive Technology. We actually design & Manufacture electronic components for Electric Vehicles

    $27 (Avg Bid)
    $27 Avg Bid
    29 bids

    I need him to design my logo, with name VePSA Taiwa., It should be related to Technology & Automotive since we manufacture & develop, electronics products for Electric vehicles.

    $25 (Avg Bid)
    $25 Avg Bid
    26 bids

    d someone or manufacture to help develop my product

    $701 (Avg Bid)
    $701 Avg Bid
    11 bids

    ..."simple" project for my first foray into Injection molding, I do not have the Mold Flow and related Injection Molded expertise to setup the sprue tree, design the gates, perform draft/mold flow analyses and assist with the design of all the needed parts to create a good working mold (aluminum). I would need someone familiar with the plastic injection

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    18 bids

    I need some Australian suppliers for single ingredient essential oil suppliers to manufacture custom mixes. All I need from you is to speak with suppliers in Australia or who can ship here and work out best pricing for specific ingredients, mostly fruit and wood based oils.

    $358 (Avg Bid)
    Urgent
    $358 Avg Bid
    9 bids

    ...requirements: 1. Waterproof and Otherwise Weather Resistant (Plastic Body Preferred) 2. A central black light tube (previous models have utilized the Philips 6W 9inch T5 Black Light Tube for example) 3. A removable cylinder of 1cmX1cm firm mesh, surrounding the central black light 4. A removable plastic bottom, about 2 inches deep and capable of holding liquid

    $968 (Avg Bid)
    $968 Avg Bid
    12 bids

    We manufacture confectionery like toffees and chocolates since 1897 and we need to get our products look more attractive provide me with a solution for it.

    $146 (Avg Bid)
    $146 Avg Bid
    15 bids

    I need a electronic engineer to manufacture circuit boards for our new controller for PS4, contact for more info. Looking for engineer ASAP

    $1769 (Avg Bid)
    $1769 Avg Bid
    7 bids
    Trophy icon Fishing Boat Logo 19 days left

    ...elements of the logo. A "criss cross" of the fishhooks is important to the owner, with undertones of stars inlaid in the crossed hooks. This is an homage to the state of manufacture since the owner has ties to the boat makers. NOTE - In addition to appearing on the vessel itself, the logo should also be designed such that it is easily applicable in

    $289 (Avg Bid)
    Featured Guaranteed
    $289 Avg Bid
    174 entries
    CREATE STL FILES 5 days left
    VERIFIED

    i have some board game parts that need stl files (two game pieces and one game board) for making plastic prototypes and for injection molded parts production. i have the models currently as fbx and rendered png files and i will tell you the dimensions. Budget $40 NO BIDS FROM INDIA

    $39 (Avg Bid)
    $39 Avg Bid
    17 bids

    Hi, We need a Copywriter (Product E-commerce), Article Writer (For Blog or Vlog) and Screenwriter (Product Video Ads) for our e-commerce website. This person must have a very good marketing sense, creative sense, and a good sense of humour. To be considered for the job, please write for the following product, a deck of black card (like this: https://www

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    14 bids

    I need a graphics artist/designer to design 2 images/pictures. We're a new solar energy technology start-up company that plans to manufacture "nanograss solar" technology. It's a solar panel with grass-like materials on the surface that collect solar rays to create energy. 1. I need an original high resolution cover photo for a business plan

    $145 (Avg Bid)
    Guaranteed
    $145 Avg Bid
    81 entries

    We manufacture 40 feet shipping container farms and would like a short introduction video of 45-60 seconds showing the outside/inside/shelves/then adding plants/ and telling people you can farm anywhere. We would like two types of backgrounds/scenes 1. City and Urban environment 2. Rural African remote village We can supply our logos and photos of

    $146 (Avg Bid)
    $146 Avg Bid
    11 bids

    Hello, I would like to create a simple 3D modeling of a plastic pouch with a label on it, would you be interested for this project (we can talk about the price)

    $13 (Avg Bid)
    $13 Avg Bid
    1 bids

    i have some board game parts that need stl files (two game pieces and one game board) for making plastic prototypes and for injection molded parts production. i have the models currently as fbx and rendered png files and i will tell you the dimensions. Budget $40 NO BIDS FROM INDIA

    $422 (Avg Bid)
    $422 Avg Bid
    35 bids

    I need AutoCAD 3D designs to be developed for a project that will involve thermal plastic, injection molding. Based on my product functional requirements, I will need an Engineer to do the following: 1. document the design using AutoCAD in 3D. 2. recommend enhancements / modifications to the design. 3. recommend the optimal material to use. 4

    $240 (Avg Bid)
    $240 Avg Bid
    30 bids

    looking for a cad of a container made from plastic.

    $204 (Avg Bid)
    $204 Avg Bid
    51 bids

    Starting point. We have the industrial design of the handheld device. We have electronics part of the device working. I need someone who is fully available within the next 3 days to review the design and make modification required by the factory to make parts moldable. The person should be highly experienced with plastics for molding designs with strong Solidworks experience. Please, expec...

    $17 - $28 / hr
    Urgent Sealed
    $17 - $28 / hr
    45 bids

    I live in Ireland. I am a retired General Medical practitioner. Five years ago I invented a predator proof hen (chicken) movable coop. It is constructed from plastic sheeting and steel mesh and comes as a flat pack. I have a USPTO patent pending status on this invention. I want to sell exclusive world manufacturing and distribution rights on this invention

    $772 (Avg Bid)
    $772 Avg Bid
    8 bids

    We are developing a machine too seal lami & plastic tube using ultrasonic tube sealing. We are looking for person with previous experience in the same.

    $854 (Avg Bid)
    $854 Avg Bid
    7 bids

    I want to create images of the product I manufacture.

    $77 / hr (Avg Bid)
    $77 / hr Avg Bid
    87 bids

    ...need a device for mixing small quantities of liquids, up to 2 cc, by vibration. It would use a cup with a voice coil actuator. The cup should have a removable close fitting plastic vial to hold the liquid. The vial would have a round bottom and vertical sides and a cap. have done some experiments using loud speakers which point in the right direction

    $1671 (Avg Bid)
    $1671 Avg Bid
    16 bids
    BLOW MOLD DESIGN 4 days left

    ...mold for a simple blow molded design. Not a injection mold. That will be in the shape of a Mylar balloon as you see in the picture. But it will be blow molded into a plastic design. It will have to be made in .STP format I have attached a picture exactly what it should look like. The picture shows the balloon on a cube stand, but we do

    $191 (Avg Bid)
    $191 Avg Bid
    40 bids

    Hello, I require help with Logo design and branding for an online ecom [login to view URL] shop will selling eco/ bio products which are made from all natural fibers and materials...and branding for an online ecom [login to view URL] shop will selling eco/ bio products which are made from all natural fibers and materials. Than name of the brand is People Against Plastic.

    $179 (Avg Bid)
    $179 Avg Bid
    93 bids

    We need articles about impact of plastics, plastic straws etc. on ocean and environment.

    $42 (Avg Bid)
    $42 Avg Bid
    37 bids

    ...for an Electronic/PCB project that we have already completed. Please refer project description as listed below prior sending me you proposal. Project Requirements: • Based on our specification we need a 3D designer to finalize a design which will be in two parts and ready for 3D prints. • Expect a few iterations during the project time, i.e. come up with

    $25 (Avg Bid)
    $25 Avg Bid
    2 bids

    ...for an Electronic/PCB project that we have already completed. Please refer project description as listed below prior sending me you proposal. Project Requirements: • Based on our specification we need a 3D designer to finalize a design which will be in two parts and ready for 3D prints. • Expect a few iterations during the project time, i.e. come up with

    $81 (Avg Bid)
    $81 Avg Bid
    30 bids
    Design project 3 days left

    I need a 3D model of something. I have an ABS plastic stick with a ruler on it which fits a plastic tip. It is a handle for a manual tattoo needle. Curewntly the handle does not for the tip well, I want to do a silicone over mold to make it fit better. I have a current design in production, I just need to improve it!

    $191 (Avg Bid)
    $191 Avg Bid
    30 bids
    Fashion Artist 3 days left

    Hand Panted Handbag prototype ( made of plastic) to be designed and re designed therefore the paint should be removable

    $153 (Avg Bid)
    $153 Avg Bid
    9 bids

    I am producing a bamboo toothbrush for sale in the UK. The idea of the product is that it is more environmentally friendly than a plastic handled toothbrush, it also has charcoal infused bristles. I require a listing written that is a descriptive but easy to read pitch and must be optimised to rank well on Amazon. As a guide, this article would be

    $275 (Avg Bid)
    $275 Avg Bid
    27 bids

    We are a start-up based in Madrid, Spain, trying to manufacture a canned carbonised alcoholic beverage. What we're looking for: The can must be using attractive/colors in order to attract the eye as that is our main selling point. The preferred design would be geometrical shapes, lines etc.. When the consumer is walking down the aisle at the grocery

    $516 (Avg Bid)
    $516 Avg Bid
    72 bids
    Trophy icon Garlic Sauce Food Label Design 25 days left

    ...loved and cherished in our home and communities to all of those who have a passion for food and life. About the Product: The product is white and fluffy, it looks like a cloudy sauce. I am planning to have it in a glass mason jar or plastic container, either way, you would be able to see the white color/texture of the sauce, at least a little taste of

    $361 (Avg Bid)
    Guaranteed Sealed
    $361 Avg Bid
    46 entries

    The therapeutic goods administration is super confusing and seems like theres a LONG information learning curve. Can someone w...super confusing and seems like theres a LONG information learning curve. Can someone walk me through a solution to the manufacturing and distribution process of my product? I want to manufacture here in Australia and export.

    $39 / hr (Avg Bid)
    $39 / hr Avg Bid
    9 bids
    Technology Speech Writer 9 days left
    VERIFIED

    I am an executive for a large global technology manufacture and need a speech written for me for a keynote. The speech will be on 'change' mixed with the need to transform with today's technology and consumption based economy.

    $5007 (Avg Bid)
    Featured NDA
    $5007 Avg Bid
    22 bids

    From time to time, we need to hire a interior hospitality f...internally. We would need someone to be able to provide fresh, new designs and provide in CAD: Hospitality case goods, seating such as lounge chairs, sofas, barstools, etc. We manufacture hospitality furniture for the well known hotel brands such as Marriott, IHG, Hilton, Hyatt and Carlson.

    $1511 (Avg Bid)
    $1511 Avg Bid
    77 bids

    ...involved in the design of Product and Packaging concepts of plastic products for Personal, Home use as well as Cosmetics, Medical and Automotive range. We are looking for an Industrial designer who can work with us on building concepts and 3D models of the same ready for presentation. The profile can be a Freelance, Project basis or a full-time position

    $522 (Avg Bid)
    $522 Avg Bid
    44 bids

    Manufacturer supervisor

    $561 (Avg Bid)
    $561 Avg Bid
    15 bids

    Looking for a mechanical design engineer specialising in product / enclosure design, well-versed in 3D modeling and CAD - SolidWorks preferred. Must have working knowledge of fabrication processes using metal and plastic materials. We need someone with great practical experience in product design for manufacturing. Candidate should be available to work

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    58 bids

    Hi my love bird lost her foot. I want someone to make a 3D model of a love bird foot so that I can 3D print it and attach it the her leg. You can come up with the design o...that I can 3D print it and attach it the her leg. You can come up with the design on your own but I want her to have a realistic food but obviously it will be made out of plastic.

    $90 (Avg Bid)
    $90 Avg Bid
    39 bids

    My design is a cover for a stethoscope (plastic of some sort). a very simple design in the shape of a Y, a front and a back with a 1 inch fold (like a baggy) that will fold (located at the bottom of the Y shape) under and then over thefront piece,

    $184 (Avg Bid)
    $184 Avg Bid
    23 bids

    Require two CAD files drawn for plastic moulds with spherical holes incorporated. Small dimensions used (<=30mm). Permanent snap lock mechanism required to fit pieces together. I have basic drawings to show you.

    $181 (Avg Bid)
    $181 Avg Bid
    54 bids

    need to change the color on of plastic mannequin white in color real human of body parts now pls respond how many photos you can do now ? 40C the photo i have 500 to do but we strat with 50 today you have to do a teste , pls i need to dont have to write to evely annfert all question, i show you a sample, pls do no maintaigne me toke for an hours

    $149 (Avg Bid)
    $149 Avg Bid
    29 bids

    Hi there. I have a business based in south africa. We manufacture plastic bags (like the carrier bags you use after grocery shopping and other plastic bags like refuse bags, etc). We are in existence for the past 14 years or so. We have to expand our plant in order to survive the economy of scale. financial limitations are always found due to capital

    $620 (Avg Bid)
    $620 Avg Bid
    25 bids

    This is an easy and fun project. Looking to have the following backpack designed in many different varieties for potential future product design additions to an outdoors companies offerings. Please use your creativity. You are free to add anything you think will make the product sell (i.e. plastic handles, rubber tipped zippers, neon green molle

    $51 (Avg Bid)
    $51 Avg Bid
    12 bids

    ...real life) representations of our retail products for use in print, video and other marketing. Below is the outline of each product group which will need a model, and a number of renderings per model. Source files for product labeling is provided in native file formats, as well as PDF. NOTE: The labels must be applied to the models without distortion

    $574 (Avg Bid)
    $574 Avg Bid
    44 bids

    Have the ability to manufacture from a made design. Start with a prototype and continue with manufacturing of the product. Price will be discussed once freelancer is offered the job. You'll have the opportunity to discuss the pricing prior to accepting the job. The file that is uploaded is not the actual hose we need. It is just a sample of a very

    $35 (Avg Bid)
    $35 Avg Bid
    15 bids

    The site is built with the AVADA WordPress Theme. An example pa...added. About 20 pages. I need pages for: Brass Shim Stock Blue Tempered Shim Stock Steel Shim Stock Shim Stock (copper, nickel, aluminum) Stainless Slotted Shims Plastic Shim Stock Plastic Slotted Shims Feeler Gage Music Wire Key Stock Dril Rod Arbor Spacer & Shims Tool Steel Foil Wrap

    $224 (Avg Bid)
    $224 Avg Bid
    17 bids

    ...one record for reference. These are the instructions from our printer on how these files need to be prepared: The custom die cutting is the only option to cut through the plastic material. Artwork will have to follow the guidelines below: Files will need to be saved to final page size in CMYK with 1/8" (0.125) bleed and 1/8" (0.125) safety in a high

    $575 (Avg Bid)
    $575 Avg Bid
    42 bids
    Bag Design Ended
    VERIFIED

    I am looking for someone who can assist in designing 5 handbags for manufacture. Must have good design skills particularly in a graphic design software such as Adobe Illustrator or In Design or similar. I need someone who can start and complete the job within the next 2 weeks. Tasks: Design 5 contemporary Handbags interior/exterior including the hardware

    $249 (Avg Bid)
    $249 Avg Bid
    37 bids