Mechanical Engineering Jobs

Mechanical Engineering is the branch of engineering that deals with the generation and application of mechanical power in the design and production of machines and tools. It is one of the worldâEUR(TM)s oldest engineering disciplines. If your business deals with mechanical engineering and needs help, such help is available in the form of mechanical engineering freelancers. You can hire such freelancers right here. Simply start by posting a mechanical engineering job today!

Hire Mechanical Engineers

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    110 jobs found, pricing in NZD

    I need a mechanical design engineer who can design a UST-Petroleum. More details will be provided.

    $98 (Avg Bid)
    $98 Avg Bid
    3 bids

    Transformer model, losses, voltages, currents and magnetic flux of designed transformer are presented in simulation results. Finite element method is used at the simulations. Results of input voltages are consistent with applied excitation values. Critical points on the core are seen from magnetic flux distribution. The result of magnetic flux of this study is validated by comparison of similar studies in literature. Tthe transformer modeling and analysis on a simulation program such as ANSYS.

    $163 (Avg Bid)
    $163 Avg Bid
    5 bids
    Container House Sections 6 days left
    VERIFIED

    I need Welding part in garage, and patio, doors, windows, stair details. And isometric construction principle of the garage and patio

    $283 (Avg Bid)
    $283 Avg Bid
    8 bids
    $25 Avg Bid
    3 bids

    Hello I need help in Automatic control project. I need system modeling, system analysis and controller design. All work should be written in ms word with clear matlab graphs. Pay will be per question basis as system analysis, system modeling and controller design. Thanks.

    $277 (Avg Bid)
    $277 Avg Bid
    7 bids

    I need assistance for a 3 hour project on the 14th of December in the subject mathematical modelling for chemical and biochemical systems. Price can be negotiated. Send me a message if it’s interesting for you

    $151 (Avg Bid)
    $151 Avg Bid
    7 bids
    need catia expert ,, 6 days left
    VERIFIED

    more info will b shared in chat

    $12 - $30
    Sealed
    $12 - $30
    6 bids

    Require 1 or two geometries to be made in Catia and applied to a base surface model

    $217 (Avg Bid)
    $217 Avg Bid
    14 bids
    MATLAB Project 6 days left
    VERIFIED

    I need someone to do MATLAB Programming as mentioned in the picture

    $40 (Avg Bid)
    $40 Avg Bid
    13 bids

    I need an expert for my project. I'll share the details in chat

    $45 - $371
    Sealed NDA
    $45 - $371
    21 bids
    CAD works 6 days left
    VERIFIED

    Hye All, I need help in my CAD Works. please help me ya

    $24 (Avg Bid)
    $24 Avg Bid
    52 bids

    Details view of software Advance Stress Analysis Storage Tank-pump system modeling Column-heat exchanger model WRC-297 nozzle flexibility Theory of load case generation PSV force calculation/ Slug force Critical Systems viz. : Turbine; Pump; Column, Air Fine Cooler et Spring design & Modeling in CAESAR II Pump Calculation API 610 Equipment Modeling Pipe Rack CAESAR Il Model Column Piping System

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    7 bids

    The CNC Programmer is responsible for crafting quality precision metal parts according to their CAD designs using CAM software required by the machine.

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    14 bids
    EV cargo bike 6 days left

    Looking for market analysis, competition analysis, Market feasibility. Knowledge of electric vehicles in the cargo or last mile delivery or hyper local delivery.

    $181 (Avg Bid)
    $181 Avg Bid
    5 bids
    Solidworks expert 6 days left
    VERIFIED

    I have a model ready just there is small editing I want. Its 5-10 min. Work. Rest details we discuss in chat.

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    31 bids

    I need a matlab code to draw the relation between turbine power and turbine speed with maximum power point tracker as in attached figure

    $53 (Avg Bid)
    $53 Avg Bid
    11 bids

    -hvac drawing . -plumbing drawing . -fire fighting drawing. -bill of quantities . -shop drawing

    $776 (Avg Bid)
    $776 Avg Bid
    20 bids

    I have this project due in a couple of days. It is based on Matlab coding, where a basic car frame structure is built and torsion stiffness is studied. The details of the outline is attached. I have done Task 1 and 2. I need you to complete this project due on Dec 5th. Please get back to me ASAP.

    $157 (Avg Bid)
    $157 Avg Bid
    21 bids
    Electric drives 5 days left

    Tutorial in electric motor drives

    $228 (Avg Bid)
    $228 Avg Bid
    6 bids
    solidworks 5 days left
    VERIFIED

    Solidworks ddesign project rleated

    $42 (Avg Bid)
    $42 Avg Bid
    48 bids

    A CNC machine moves a rotating spindle with a cutting blade in three dimensions, X, Y and Z. So that it can do this well, the spindle has to be precisely aligned to the machine bed in two axes. The machine I have has these adjustments (called "Tramming") but they are poorly designed. The Spindle bolts onto a vertical plate. I need a design to add an intermediate plate that can be easily adjusted at four points and once set into position locks there. In the first picture you see the current spindle assembly from the side. On the far right is the spindle. It is attached to a 6mm aluminium plate (blue) and that plate is moved up and down by the mechanism you see to the left of it. In the second and third pictures, you can see how the spindle is attached to the plate by those fo...

    $239 (Avg Bid)
    $239 Avg Bid
    8 bids

    Precision molds for high efficiency casting

    $25 (Avg Bid)
    $25 Avg Bid
    5 bids

    I would like to hire Solidworks specialist experienced in sheet metal to design simple metal enclosure with 1 glass door for 3D printer Ender 3 Pro. General requirements (more details will be provided later): 1) Dimensions of the enclosure: 480 x 600 x 720 (mm) 2) Body full metal made of 1 mm steel sheet 3) Enclsoure must have 1 door with big will glass window and closing mechanism 4) When the door is closed the interior must be sealed adn no air or smoke can escape to exterior 5) Must be able to seal any possible fire inside the enclosure and not letting it to escape to the exterior due to possible 3D printer failures 6) The project must be done tacking into account the following manufaturing available processes: - Laser cuting of metal sheet - Metal sheet bending - Rive...

    $105 (Avg Bid)
    $105 Avg Bid
    22 bids
    Control Systems Expert 5 days left
    VERIFIED

    I need someone who is expert in control systems and is ready to work for couple of days.

    $205 (Avg Bid)
    $205 Avg Bid
    12 bids

    The attached picture shows the custom designed wine cellar the client wants. They would like the top half to be able to move down for them to select a bottle of wine. The top half would be a single bottle wine system and the bottom half would be a double bottle wine system. The wine cellar is a standup wine cellar that consists of two panels. The bottom panel (half) will have a 2 bottle deep wine panel- this panel will remain in place for the entire time and does not need to move. The top panel (half) the client wants on a motorized mechanical system that allows them to bring it down to the ground in order to select a bottle of wine and then put it back up. The system that brings the wall down to the ground is the system I need help with determining what system I need

    $2583 (Avg Bid)
    $2583 Avg Bid
    22 bids
    abaqus help ( structural ) 5 days left
    VERIFIED

    Hello need help with abaqus and making a structure

    $37 (Avg Bid)
    $37 Avg Bid
    11 bids

    I am looking for a qualified drainage engineer who can provide some advice and help design a slightly bespoke above ground drinaiage system for a bespoke new build single home. It has a flat roofs as its a high-quality design in a conservation area. I am looing for good and discrete products that can be used for the roof penetration, and potentially minimising them through air admittance valves etc. I am an architect and looking for specialist drinaiage design expertise.

    $53 / hr (Avg Bid)
    $53 / hr Avg Bid
    6 bids
    Del veleno 4 days left

    Pocket knife handle, require to apply drawings file on different material, wood, horn, bone...

    $182 (Avg Bid)
    $182 Avg Bid
    12 bids

    Mechanical Engineering fild Maintinance supervisor

    $424 (Avg Bid)
    $424 Avg Bid
    3 bids

    I am doing a project. I conventional engine we use cam to open the valve and to close the valve we are dependent on the spring. I my project i have made a prototype that opens and closes the valve solely using cam. ie. springs are eliminated. The objective of my project are---- 1). I want to show that in the conventional system there is a valve float scenario which is eliminated in the proposed model. 2). Vibrations are eliminated. I searched on the internet and I found that we need to get the eigen frequency of both the models to compare with each other. 3). I have to perform ansys using 5 to 6 materials and choose the optimal material. I am attaching file which contains images of my model

    $77 (Avg Bid)
    $77 Avg Bid
    13 bids
    China Villa 4 days left
    VERIFIED

    Mini House Villa in China approx. 240 square feet 1. 3D rendering of exterior and all interior rooms 2. Virtual 3D files for viewing floor plans and layouts 3. 2D CAD drawings of all floor plan 4. Electrical, plumbing, mechanical drawings in CAD 5. BOM of electrical, mechanical and plumbing 6. Exterior landscaping 3D 7. Exterior landscaping 2D 8. Exterior pool 3D and 2D 9. Exterior 2 car garage with upper storage and upper living space small kitchen bathroom bedroom. Slab on grade foundation. (3 floors) 10. Exterior 3 floor prefabricated building, slab on grade foundation. Part of no 9 11. 2D foundation drawings and sonotubes for post 12. Exterior perimeter wall, with access and gate 13. 3D rendering of exterior landscape, pool, garage and perimeter fence and gate 14. Virtu...

    $776 (Avg Bid)
    $776 Avg Bid
    36 bids
    solar cell 4 days left
    VERIFIED

    gathering information about solar cells

    $225 (Avg Bid)
    $225 Avg Bid
    19 bids

    Factory design for production of Methoxy Polyethylene Glycol. Feed line: ethylene oxide and methanol Production size: 50,000 m tons

    $181 (Avg Bid)
    $181 Avg Bid
    7 bids
    Mechanical engineering -- 4 4 days left
    VERIFIED

    I want a mechanical engineering I have an idea i want to discuss it.

    $648 (Avg Bid)
    $648 Avg Bid
    45 bids
    Abaqus modelling 4 days left

    Undertaken some abaqus modelling and analysis for for a component behaviour using different frequencies to demonstrate fatigue.

    $280 (Avg Bid)
    $280 Avg Bid
    18 bids

    Yes you read it correctly. I am looking for someone who can fit an external battery isolator to an old land rover with battery drain issues. It has to be water proof.

    $243 (Avg Bid)
    $243 Avg Bid
    3 bids
    Design a Vibration Absorber. 4 days left
    VERIFIED

    ONLY EXPERTS ON "VIBRATION" Design a Vibration Absorber to reduce the vibration on the system. Check the attached file.

    $217 (Avg Bid)
    $217 Avg Bid
    15 bids

    3d modelling SOLIDWORKS long term . Part time Metal and rubber parts.. plastic Only 3d modelling Attached are pics of sample parts.

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    44 bids
    FrontCleaner 4 days left

    I prefer in-person (or by phone if in-person is not possible). but generically I want a smart electronic product to be designed to clean a specific side of wigs. I will give more details and info by phone or via email if a meeting in person is not possible.

    $39 (Avg Bid)
    $39 Avg Bid
    2 bids

    Yanmar 2GM20FC fitted in 9 m yacht currently on hard standing at North Berwick harbour. Work required is to replace the gasket sealing the sail drive to the hull, inspect engine mounts and general service/checkover (valves, injectors, gearbox and linkage to throttle)

    $2489 (Avg Bid)
    $2489 Avg Bid
    6 bids

    A CFD engineer is required for the simulation of cleaning product functionality designs. Candidate must have knowledge of fluid simulations. I prefer one who lives in Indore, MP, India

    $191 (Avg Bid)
    $191 Avg Bid
    7 bids

    Monitoring and Modelling CO2 Flux Practical , environmental modelling Monitoring and Modelling CO2 Flux Practical , environmental modelling

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    3 bids

    Furnishing kitchen drgs. make electrical,plumbing,drain points,gas points and hvac drgs.

    $549 (Avg Bid)
    $549 Avg Bid
    17 bids
    Machine Design II 3 days left
    VERIFIED

    Kinematics of a Watt II Six-Bar Linkage. Acceleration analysis of the six-bar linkage

    $49 - $59
    Sealed
    $49 - $59
    5 bids
    $37 / hr Avg Bid
    15 bids

    The goal of this project is to make a Simulink model to model/simulate the operation of a fairly rudimentary 4-bit processor. The diagram below represents an example of what your processor model will look like once all the parts are done and combined. • 4-bit PIPO register. • 4-bit adder. • Logic unit (set of elementary logic gates). • 4 to 1 multiplexer. • Control unit (State machine). the project have to done on SIMULINK

    $52 (Avg Bid)
    $52 Avg Bid
    3 bids

    I am looking for a mechanical engineer who can help me to do analysis on heat transfer of a fluid flowing through a pipe. Comsol Software knowledge is preferable.

    $31 (Avg Bid)
    $31 Avg Bid
    9 bids

    I have done some experiments on a fluid ( water ) flow through a aluminum pipe with a veritable heat flux. Looking for a mechanical Engineer to write a small technical report.

    $43 (Avg Bid)
    $43 Avg Bid
    26 bids
    $12 - $30
    34 bids

    Top Mechanical Engineering Community Articles