Construction Jobs

I’m ready to transform my entire back yard into a more practical, family-friendly space and need a contractor who can take the project from demolition through final finishes. Scope of work • Pour new concrete pads on both sides of the existing patio (where the heaters sit now). These pads will become twin BBQ stations and I want each one protected by a pergola so the area can stay open-air but shaded. • Form and pour a clean concrete surround for the pool pump, then build a neat insulated-panel cover that keeps the equipment out of sight yet well-ventilated. • Build stone stairs that run from the main yard level down to the rear fence line, matching the style of the rest of the hardscape. • Excavate and install a retaining wall along the back boundary to ...

I need my existing two-storey duplex plan revised for a Canadian building-permit submission. All work has to satisfy the National Building Code of Canada, so please be comfortable detailing to NBC requirements and provincial amendments. The most critical structural adjustments are three-fold: converting the current hip roof to a 6/12-pitch gable while keeping the new profile in harmony with the home’s present style, swapping every steel beam for properly sized LVL members, and introducing below-grade basement doors on both sides complete with the extra footings those openings demand. Alongside that, floor framing must shift to conventional 2 × 10 dimensional lumber (no engineered joists) and the roof vents need to become a continuous ridge vent. On the street façade I&r...

I need a seismic gas valve installed on an existing residential property. I also need assistance with obtaining the necessary permits for the installation. Ideal Skills and Experience: - Experience with gas line installations - Knowledge of seismic gas valve requirements - Familiarity with residential property regulations and permit acquisition - Ability to work on existing structures without causing damage Please provide a detailed bid including timelines and any relevant experience. 1471 S. Wooster St., Los Angeles, CA 90035. Need C-36 plumber to obtain permits, purchase and install 8 each 3/4" seismic shut off valves with brackets for 8 unit multi-family building.

I'm seeking a professional to install a well water system for commercial use on an island. The system will serve a house and four cottages. Key requirements: - Primary component: Filtration system - Ensure water quality and safety for all residential units Ideal skills and experience: - Experience in well water system installation - Knowledge of filtration systems - Familiarity with regulations in BC, Canada - Ability to work on Mayne Island

Looking for a salesman to visit construction sites to promote my product. I'm looking for an experienced sales representative in Miami , FL to join our construction company. The primary responsibility will be client acquisition. Key Responsibilities: - Identify and target potential clients - Develop and deliver sales pitches - Expand our client base in the construction sector Ideal Skills and Experience: - Proven track record in general sales - Strong communication skills - Ability to engage and persuade potential clients Your expertise will help us grow and succeed in a competitive market.

We are undertaking a PQQ for a construction frameworks with National Rail and have the following requirement: Please provide three of three (3) contract or programme examples that demonstrate your organisation’s capability and relevant experience in delivering complex programmes of property maintenance, minor works, and building services related to this framework scope Examples should clearly demonstrate your ability to manage both the technical delivery and logistical complexity of multi-site, safety-critical, and access-constrained environments — including coordination with multiple stakeholders and subcontractors. Each example should include the following details: 1. Client name and contract/programme title 2. Contract or programme value and duration 3. Scope of services...

Scaled Layouts (Draughtsman‑Ready) Project: Detached Outbuilding / Games Room Address: 11 Cliff Lane, Washingborough, LN4 1JY Authority: North Kesteven District Council --- Overview Layouts prepared at recognised planning scales for LDC and Building Control. Fully dimensioned and suitable for direct CAD tracing. --- D01 – Floor Plan (1:50) Overall size: 6000 × 3500 mm Wall build‑up: 102.5 mm brick / 100 mm insulated cavity / 100 mm fibolite block (≈302.5 mm total) Openings: Front (6.0 m): 3000 mm double UPVC doors, centred Side (3.5 m): 900 mm single door, centred Approx. internal clear size: 5395 × 2895 mm --- D02 – Elevations (1:50) Facing brick: Forterra Hampton Rural Blend UPVC frames: light grey Heights: Max overall height: 250...

I'm seeking an independent building inspector for a residential property. The inspection is needed during ongoing construction and should cover the complete build. Ideal skills and experience: - Certification in building inspection - Experience with residential properties - Knowledge of construction processes and standards - Attention to detail and thoroughness Please provide relevant experience in your bids. Work has started and a concrete pour booked in. Builder has requested a visit to check over foundations ready for the pour and has been advised my Architect has not registered the build.

I need an I-beam frame to support 4-6 tanks, each 6’ in diameter and weighing over 5 tons, on a mildly sloped concrete floor (less than 5 degrees). Requirements: - Design an I-beam frame - Ensure stability on a mild slope - 5 tanks, 72” diameter, 4 legs each - concrete floor is sloped for containment and we need the tanks level with adjustable feet, apx 4-5 feet per side. Ideal Skills and Experience: - Structural engineering expertise for stamped prints Please provide relevant experience and a detailed proposal.

45’ x 8’6” x 10’ semi tractor trailer. I have removed the wheels and axils. The trailer rests on Railroad Ties in 4 places aligning with the steel trusses. The trailer has been hurricane strapped down in 8 places I have built it out complete with electrical, plumbing and septic (details below) The unit has been fully functional for 3 years . The county is involved due to a neighbor raising concerns about the zoning for the Tiny home because it is in a backyard of a single family dwelling. Escambia has voted in the used of ADU’s (accessory dwelling units) 1 per single family Home with proper permitting. The county wants plans designed and permitting pulled so that this ADU can remain On property A detailed photo library of the ADU is attached. T...

I have a steady stream of coursework to complete for the Edexcel BTEC Level 3 National Diploma in Construction and the Built Environment. The work spans every unit in the syllabus—from core topics such as Construction Principles and Health & Safety through to the Management of Construction Projects—so you’ll need broad, up-to-date subject knowledge. Each task must arrive as a clean, fully formatted Word document that stands up to Turnitin and other AI-detection checks. I will only accept work that meets all of the following criteria: • Originality: under 20 % similarity on Turnitin and no detectable AI content • Academic integrity: referenced in line with BTEC standards using credible sources (textbooks, online articles, reputable websites, and especiall...

Project: Construction Drawings – 3-Level Commercial Building (Post-Approval) We are seeking an experienced architect to prepare Detailed Construction Drawings for a DA-approved, three-level commercial shell building with basement parking. Planning / Development Approval Drawings are complete and available in Revit and CAD. Scope • Review approved planning drawings • Prepare construction-ready / IFC drawings for builder pricing and certification • Refine design for buildability and cost efficiency in coordination with engineers • Deliver: o Plans, sections, elevations o Window & door schedules o Façade and envelope details o Key construction details • Ensure compliance with NCC and Australian Standards Requirements • Commercial construction doc...

I need a durable steel ramp designed for loading and unloading vehicles. The ramp must be 15 feet long and 5 feet wide, capable of supporting a live load of 3000 lbs. Key Requirements: - Fixed location installation - Suitable for outdoor use Ideal skills and experience: - Expertise in metal fabrication - Experience with heavy load-bearing structures - Knowledge of outdoor durability requirements

I'm bidding on an improvement to a building, I'd like you to create a bid outlining time and materials for the structural and miscellaneous elements with references back to page/detail for each line item. Include any equipment necessary, I'll provide price points for steel and labor in our market

I'm looking to add a dedicated living room extension to my house, designed exclusively for a golf simulator. Key requirements: - Space for a golf simulator - Design should be suitable for a living room extension Ideal skills and experience: - Experience with residential room additions - Knowledge of space optimization for specialized installations like golf simulators - Strong design skills to ensure the new room integrates well with the existing home Please provide examples of similar work.

I need a TV transmitter moved from its current roof installation to a different building far away. (30 miles away) Requirements: - Experience with moving heavy equipment - Safety protocols for roof work - Transport to a distant location - Reinstall at the new site Engineering work needed to assess project and handle all project details. The WBII transmitter is in Holly Springs, MS and needs to be moved to a building in Memphis, TN

Needing updated bid sheets and correspond with buyout sheets for certain profit margins. Schedules, project management tool for construction company.

I need a civil engineer to repair an existing road and implement a minor drainage system. Key tasks include: - Assessing the current road condition - Carrying out necessary repairs - Implementing a designed drainage system to prevent future issues Ideal skills and experience: - Civil engineering expertise - Experience with road repair and drainage systems - Attention to detail and project management skills Please provide a detailed plan and timeline with your bid.

I'm seeking detailed construction drawings for a modern-style renovation of my house. The areas to be renovated include: - Kitchen - Bathroom - Living room - Bedrooms I have some specific materials and finishes in mind, but I'm also open to suggestions. Ideal candidates should have: - Experience in residential renovation drawings - Strong understanding of modern design principles - Ability to recommend materials and finishes Please include relevant portfolio work in your bids.

I'm seeking a skilled architect and structural engineer to design a traditional-style, 2800 sq ft slab-on-grade home. I already have a detailed floor plan and need an expert to bring my vision to life. disciplines: Architectural Structural Mechanical Electrical Civil Ideal Skills and Experience: - Expertise in traditional architectural design - Experience with slab-on-grade construction - Ability to work from detailed floor plans - Strong attention to detail and craftsmanship Please provide examples of similar work done.

I require a licensed civil engineer who can present an unbiased, technically sound opinion before a Greek court regarding construction damages on a residential building. Your role will be to examine the existing documentation (photos, blueprints, past inspection reports) and, if necessary, conduct an on-site visit in Greece to confirm the extent and causes of the damage. The court expects a clear, jargon-free written report in Greek that explains methodology, findings, and conclusions, followed by live testimony—either in person or via video conference—answering the judge’s questions. Experience with Greek building codes, Eurocodes, and courtroom procedure is essential, as the goal is purely an independent evaluation rather than advocating for either side. Deliverab...

I need a comprehensive list of HVAC equipment for a building project. This list should include the model and brand of each piece of equipment. Requirements: - Focus on Heating, Ventilation, and Air Conditioning equipment - Detail should include Model and Brand for each item Ideal Skills and Experience: - Familiarity with HVAC equipment - Attention to detail - Experience creating equipment lists

I run a fast-growing subcontracting firm and I’m ready to widen our footprint across Germany, Scandinavia, Belgium and the Netherlands. To do that, I’m seeking independent agents or fixers who already have genuine, on-the-ground access to live construction projects and the decision-makers behind them. Your role is simple yet highly valuable: introduce me to projects that can use our crews of painters, façade teams, roofers, drywall specialists, metal installers or sandwich-panel installers. The moment our company secures a contract that stems from your introduction, you receive an agreed commission—paid promptly and transparently. You keep full control of your network, we keep everything strictly confidential, and there’s no cap on how many projects you can ...

I'm looking for a skilled designer and builder to create a food stand for an outdoor market. The stand should be functional, eye-catching, and durable, and can be made from a combination of materials. Requirements: - Design should accommodate food display and customer interaction - Must be suitable for outdoor market conditions - Use of a combination of materials like wood, metal, and plastic - must include all machines for doing the food inside Ideal Skills and Experience: - Experience in designing and constructing market stands - Knowledge of outdoor market requirements - Proficiency in working with multiple materials - Proficiency in design

I'm seeking an experienced construction team to build a large-scale poultry shed with the capacity to grow out 3 million meat birds. The structure must be robust and reliable, as it will be used for a significant poultry operation. Key requirements include: - Steel frame construction for durability and strength - Design and build capacity for 3 million birds - Adherence to industry standards and regulations - Experience in large agricultural or industrial construction projects - Ability to provide detailed project timelines and budgets Ideal skills and experience: - Proven track record in constructing large-scale poultry or agricultural facilities - Strong knowledge of materials and construction techniques - Project management skills to oversee the construction process - Familiari...

I'm seeking an experienced construction team to build a large-scale poultry shed with the capacity to grow out 3 million meat birds. The structure must be robust and reliable, as it will be used for a significant poultry operation. Key requirements include: - Steel frame construction for durability and strength - Design and build capacity for 3 million birds - Adherence to industry standards and regulations - Experience in large agricultural or industrial construction projects - Ability to provide detailed project timelines and budgets Ideal skills and experience: - Proven track record in constructing large-scale poultry or agricultural facilities - Strong knowledge of materials and construction techniques - Project management skills to oversee the construction process - Familiari...

I require a draftsman to draft construction documentation of a 70m2 home consisting of 2 Bed, 1 bath, Kitchen and Living. The concept design is a simple timber structure with light weight metal cladding and simple geometry. The project is not sight specific and intended to be built on multiple sites. Site specific documentation will be required in the future. Concept design will be provided as a revit model Scope: - Plans: Floor Plan, Roof Plan, Floor Framing Plan, Bracing Plan, Services Plan, - Sections: As required - Elevations: As required - Details: Construction Details External , Construction Details Internal, Wet Area Details - Preliminary H1 compliance Excluded: - Context Plan - Site Plan - Internal Elevations except wet areas - Interior finishes except wet areas - Internal jo...

The original screw or bolt I’m dealing with is stripped and can no longer hold its thread, so the part it secures has started to wobble. I’m unsure whether I still have a usable replacement, which means you may need to bring a matching bolt or help me source one on-site. this is for our main entrance gate please

I'm seeking an architect to design a modern-style detached building for a gym. Requirements: - One bathroom - Gym areas: cardio, weightlifting, yoga/stretching - Exterior materials: concrete, finer board, cedar, reverse board, and batten Ideal Skills and Experience: - Expertise in modern architectural design - Experience with concrete and wood materials - Knowledge of gym layout and functionality Please provide a portfolio showcasing similar projects.

I have a 45’x 8’6” x 10’ semi tractor trailer. I have removed the wheels and axils. The trailer rests on Railroad Ties in 4 places aligning with the steel trusses. The trailer has been hurricane strapped down in 8 places I have built it out complete with electrical, plumbing and septic (details below) The unit has been fully functional for 3 years . The county is involved due to a neighbor raising concerns about the zoning for the Tiny home because it is in a backyard of a single family dwelling. Escambia has voted in the used of ADU’s (accessory dwelling units) 1 per single family Home with proper permitting. The county wants plans designed and permitting pulled so that this ADU can remain On property A detailed photo library of the ADU is attac...

I’m ready to move forward with a ground-up development of six attached townhouses on my lot in Mechanicsburg, PA. The vision is clean-lined, contemporary architecture throughout, but I don’t yet have a floor plan or working drawings—so I need a full-service builder who can guide the project from concept all the way through final inspection. Scope of work • Collaborate with me on site layout and a modern exterior/façade concept, then translate that vision into complete construction documents (Revit or AutoCAD preferred). • Handle all structural, MEP, and energy-code requirements for Cumberland County, securing permits and scheduling inspections along the way. • Oversee and self-perform—or subcontract—foundation, framing, roofing, wi...

I need a skilled professional to perform a manual takeoff using the NRM2 for my construction project. Key expectations • All measurement notes must reference the relevant NRM2 clauses so anyone can trace your logic. • Units, descriptions and item structuring have to follow the NRM2 work-section coding. • Include a marked-up copy of the drawings that shows every element measured, plus an Excel workbook (or compatible format) containing the detailed take-off sheets and the summary BOQ. • Final output must be neat, clearly named and ready for immediate import into my estimating templates. I am flexible on the software you use—Bluebeam, PlanSwift, AutoCAD or hand-marked PDFs are all acceptable—as long as the calculation trail is easy to audit and the e...

Our company is currently entering an exciting growth phase, and we are looking to expand our engineering department. We are seeking a detail-oriented Civil & Structural Engineer to join our team for ongoing and upcoming projects. The ideal candidate will be responsible for structural analysis, design calculations, and ensuring all projects meet safety and regulatory standards. We value precision, innovative problem-solving, and a commitment to high-quality engineering. Key Responsibilities: * Perform detailed structural analysis and design for [Insert Project Type, e.g., residential, commercial, or industrial] buildings. * Prepare comprehensive design reports and structural calculation packages. * Collaborate with the team to ensure project timelines and technical specifications are...

Our company is currently entering an exciting growth phase, and we are looking to expand our engineering department. We are seeking a detail-oriented Civil & Structural Engineer to join our team for ongoing and upcoming projects. The ideal candidate will be responsible for structural analysis, design calculations, and ensuring all projects meet safety and regulatory standards. We value precision, innovative problem-solving, and a commitment to high-quality engineering. Key Responsibilities: * Perform detailed structural analysis and design for [Insert Project Type, e.g., residential, commercial, or industrial] buildings. * Prepare comprehensive design reports and structural calculation packages. * Collaborate with the team to ensure project timelines and technical specifications are...

I need assistance spanning two 16' garage door openings with LVLs. There’s only 24" of space for the king and jack studs in between the openings. This will be portal framing. Requirements: - Use existing structural drawings - Adhere to standard building codes - Support roof load in addition to garage doors Ideal Skills & Experience: - Expertise in structural framing - Experience with LVL installation - Knowledge of building codes and regulations I’m looking for a professional who can help me effectively frame this space in the middle. Please provide a detailed plan and ensure structural integrity.

I need a two-storey addition to my existing Philadelphia rowhome, aimed at creating additional living space. The new areas will include: Vathrooms - Roof deckhbut need structural drawings and spec, constrution supervision as well stamping for the entire project

I need city and state compliant renovation drawings for a commercial permit in Kenton, Ohio. Requirements: - Architectural and engineering drawings - Compliance with local regulations and codes - Experience with commercial renovation projects - Knowledge of Kenton building requirements Ideal Skills: - Architectural design - Structural engineering - Local code knowledge - Detail-oriented and reliable

I'm seeking a detailed bid packet for a construction project. The packet needs to include elevation views with component relativity. Requirements: - Professional and clear elevation views - Comprehensive component relativity - Suitable for contractors, subcontractors, and suppliers Ideal Skills: - Experience in architectural drawings - Familiarity with construction bid requirements - Attention to detail and accuracy Please provide samples of similar work.

I have a minor construction job inside an existing building: I need a brand-new wall installed to replace a damaged section. This is a small-scale task—no full renovation, just the removal of the old portion and a clean installation of the new wall, finished flush and ready for paint. Please bring the tools and materials you normally rely on for interior wall builds (light-steel or wooden framing, gypsum board or equivalent, joint compound, fasteners, level, etc.) and be prepared to tidy the workspace once the job is done. Deliverables I expect: • Demolition of the damaged wall section • Framing and secure installation of the new wall • Smooth finishing of seams and screw heads so it’s paint-ready If you have recent experience with interior partition...

I need existing Word documents and specification sheets rewritten and rebranded to align with our building system. The final output should be an editable PDF. Requirements: - Rebrand with updated logos, company colors, and revised company name/contact details - New design layout and formatting - Ensure consistency and clarity across all documents Ideal Skills and Experience: - Proficiency in Microsoft Word and PDF editing - Graphic design skills for layout and branding - Experience in technical writing and document standardization I will have on going work for the right candidate. Will need a basic knowledge of the current residential building industry.

I need a single Colorbond side gate supplied, built and installed to close off the side access of my home. The main objectives are privacy and security, so the finished gate must sit flush, latch firmly and leave no large gaps. Site access is straightforward and I can meet you to confirm exact measurements, post positioning and hinge direction. You’ll handle everything from taking final measurements, sourcing the Colorbond panels, posts and hardware, through to concrete footings, installation and clean-up. Deliverables • On-site measure and material supply • Fabrication and installation of one Colorbond gate with posts, hinges, keyed latch/lock and stopper • Gate aligned, plumb and swinging smoothly with no sag • All work and materials warranted B...

I'm looking to update my kitchen to give it a fresh, traditional look. The primary goal is to update the look and feel. I'm looking to update the following elements: - Cabinets - Countertops - Lighting fixtures Ideal skills and experience: - Experience with traditional or modern coastal kitchen designs - Proficiency in cabinet installation and countertop fabrication - Knowledge of traditional-style lighting fixtures and installation Please provide a portfolio showcasing similar work. Looking forward to your bids!

I already have a frozen layout for a small commercial development that combines a G + 1 gym, a restaurant, and an 8-D dome. All dimensions are locked; I only need them translated into clean, fully detailed AutoCAD files—no redesign work at all. Scope You will take my marked-up plans and produce a complete set of fully detailed construction drawings that follow the relevant local building codes. In addition to the architectural sheets, I also need coordinated electrical, plumbing, and HVAC layouts embedded in the same DWG environment so everything aligns perfectly. Deliverables (DWG + print-ready PDF) • Site layout • Floor plans for every level • All elevations • One longitudinal and one transverse section • Column/structural layout • Elec...

I need licensed professionals to stamp my architectural drawings for permit approval. Requirements: - Stamp needed for permit submission - Drawings are for new construction - Must meet local building codes and regulations Ideal Skills & Experience: - Licensed architect or engineer - Experience with permit approval processes - Familiarity with local building codes

Engineer seal needed for 3 ply 9.5 inch lvl beam to span 18 feet carrying a roof with shingles in florida...no snow load. The Engineer must be licenced in Florida.

I'm looking for a skilled contractor to transform my unfinished basement, currently just a storage and laundry area, into a modern, multifunctional space. The renovation should include: - Hangout Area: - A versatile space for various activities. Open to ideas, but prefer a modern design. - Exercise Area: - A dedicated zone for workouts, equipped with necessary flooring and fixtures. - Improved Laundry Area: - A more efficient and organized laundry setup. Ideal Skills and Experience: - Experience in basement renovations - Strong design sense, particularly in modern aesthetics - Ability to create multifunctional spaces - Good project management skills to ensure timely completion

I need a professional review of my open residential porch to confirm it meets WSRC 2021 requirements. The architectural plans are ready; what’s missing is a clear, point-by-point verification that every note, dimension, material spec and detail on those drawings satisfies the current code. Your task is to study the plans, flag any non-compliant item, and advise on the exact revision needed to bring it into line. A short narrative explaining each issue is fine as long as it references the matching WSRC 2021 section so my contractor can update the set without further back-and-forth. To keep everything organized I’d like three specific deliverables: • A marked-up PDF of the existing plans showing required changes. • A concise summary report listing each citatio...

Project Description: We are a construction company specializing in design and build residential houses, and we are looking for partner agents who can help us source clients and projects. This is a commission-based partnership. Partner agents will be compensated only when a contract is successfully signed. Commission Structure: • 4% commission of the total contract value • Example: For an ₱8,000,000 project, the partner agent receives ₱320,000 • Commission is released after the contract is officially signed Scope of Work: • Find potential clients interested in design and build house projects • Introduce and connect clients with our construction company • Assist in coordinating initial discussions (if needed) Project Location: • Metro Manila, Phi...

I need a detailed punch list for a construction project focusing on inspection and incomplete work. The primary area of concern is electrical systems. Key Requirements: - Thorough inspection of all electrical systems - Identify and document incomplete work - Ensure compliance with safety standards and regulations - Provide a comprehensive report with a list of tasks Ideal Skills and Experience: - Electrical engineering or technician certification - Experience in construction punch list creation - Strong attention to detail - Knowledge of safety regulations in construction Looking for professionals with a background in construction and electrical systems.

I need a seasoned bid writer – ideally with an engineering, M&E or construction background – to build a fully-editable Word template that I can drop straight into Irish public- and private-sector tenders for diesel and HVO standby generators. The area that trips me up most is the technical specification (kVA ranges, rating methodology, compliance tables), so I’m looking for someone who can flesh that out with practical, standards-based detail as well as craft all the usual contractual and safety language. What the finished document must contain • Technical specification framework covering typical standby and prime kVA bands • Scope of works for supply, installation, testing and commissioning • Tender compliance statement aligned to Irish public ...