Nx5 catia jobs
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
I need a 3D design in Catia for a tensioner which is attached The maximum is 15,07,14
I need a 3D design in Catia for a tensioner which is attached The maximum is 15,07,14
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
CATIA V5 users. Project will involve, Injection moulding, Sheet metal, Kinematics, Drafting. more details will be provided through PM. Must have good portfolio/Projects worked on in these fields.
CATIA V5 users. Project will involve, Injection moulding, Sheet metal, Kinematics, Drafting. more details will be provided through PM. Must have good portfolio/Projects worked on in these fields.
We have some drawings that we wants to convert from paper 2d drawings to both one 3D .part and one 2d Catdrawing. The catpart (3D) will be used in a setup later on. So one 2d drawing should be converted to a new 3D .catdrawing and one .catpart. Only catia V5 r18 or higher is accepted. Its clamping tools for turning/milling/drilling/hardening machines. Mvh/Andreas
I need basic 3D (CATPart) of these 7 simple pieces made in CATIA V5 for this week (untill 27), i will post photos in HD from multiple angles to make them. i am a poor student, so i have little money.
I need basic 3D (CATPart) of these 7 simple pieces made in CATIA V5 for this week (untill 27), i will post photos in HD from multiple angles to make them. i am a poor student, so i have little money.
I need simple 3D (CATPart) of these 7 pieces made in CATIA V5 for tomorrow (24/06 or 25/06)
To make a 3D solid model from a scan file. Recreate a 3D solid part from a .stl and .igs file to make a perfect solid. The scan is already align. The freeform surface at need for a precision of + or - 1.5 mm. The worker will use Catia or Geomagic design x software. He will have to deliver a .stp solid file, parasolid or .sldprt
Dear Sir, I want have a design a FMI in MATLAB which can be used to make auto desing in CATIA V6. The overall system that I am looking for would be like this: Input would be fuzzy variables to Matlab (ANFIS), the output of MATLAB need to by given to CATIA V6 for auto form generation. As the input fuzzy variables to MATLAB varry, the output form generated in CATIA also varry. Please revert if any gaps. Regds, Jai Narayan Das
Your job will be to create a 3D model on the software Catia v5 or v6 (more information on the file attached) and to complete a report with it. This work must be to a high university standard. The project must be completed by thursday 19th june 12pm.
Looking for an experienced videographer to use my Sony HXR-NX5 to film little league pitchers pitching balls in Sidney,OH this Tues. Will compensate fuel expense. Must understand shutter speeds in order to film fast moving objects like a baseball, be familiar with the Sony HXR-NX5 or similar device. Filming will last one hour from 4pm to 5pm. Could possibly lead into a once a month gig for the right person..
Need someone who can make a part in CATIA V5 using Sketcher, GSD, Part Design work bench to create the part. I need it for a research project.
It should be done Using catia software Create and define a design for an application based on the principles of the Geneva wheel. Your assembled design should fit within the bounds of an A4 piece of paper but component sizing is at your discretion. 2D assembly drawing and component drawings All drawings should be to BS8888
Hi Very small project need to do some minor modification in my catia drawing only need to add the text and notes and tolerance
with CATIA V5 R19 to finish surfacing design work of a front bumper for a custom build vehicle with front diffuser. NDA will be required. Full details including aerodynamics data will be available to winning bidder.
Hi, I have a catia drawing file in V5R19 I need to add some few dimension and add some tolerance and text It wont take more than 15Minutes
I have large number of Catia files it need to be converted it in to R19 version NO NEED TO REDRAW IT JUST CONVERT THESE TO OPEN IT UP IN R19 VERSION
Hi, Catia conversion to R19 Lowest bid wins I have more files in future. Thanks. Regards,
I would like to chat with you ( the only way I've found was to contact you is to create this fake project and invite you ). I'm looking for a Catia V5 programmer. Do you have experience with VB script in Catia V5 ? Please dont not accept this fake project.
CATIA V5 users. Project will involve, Injection moulding, Sheet metal, Kinematics, Drafting. more details will be provided through PM. Must have good portfolio/Projects worked on in these fields.
CATIA V5 users. Project will involve, Injection moulding, Sheet metal, Kinematics, Drafting. more details will be provided through PM. Must have good portfolio/Projects worked on in these fields.
CATIA V5 users. Project will involve, Injection moulding, Sheet metal, Kinematics, Drafting. more details will be provided through PM. Must have good portfolio/Projects worked on in these fields.
i want to create 3d, 2d models of various components using software's like autocad, catia.
Needed 3D model of a ball valve using CATIA for ingeneering project. Valve model will be provided and all the required meassures Should be done before a week. IT is a pretty easy task that should be donde in no more than 3-4 hours so we are paying about 30-40$
Needed 3D model of a ball valve using CATIA for ingeneering project. Valve model will be provided and all the required meassures Should be done before a week. IT is a pretty easy task that should be donde in no more than 3-4 hours so we are paying about 30-40$
For this project, you’ll prepare an AutoCAD drawing representing a plat map of a new subdivision called Oleson Village. A plat map is a drawing that shows such actual and planned features as streets and building lots. Your plat map will also show the location of trees, both those that will be saved (52) as well as those to be removed (13). Data for the drawing will come fro...is some practice in annotating a drawing with text. I think that since this has already been done in other versions of Autocad, it should be as easy as opening it in 2013 and doing a "save as". I don't know Autocad, but we do this with different verisions in Unigraphics (UGNX) (we just upgraded from NX6 to NX8 over the holidays and everything still opens without problems) and ...
Hello I noticed your post about the CNC project , could I please ask you , that if I live in Italy as a student , I can work for you or not ? I study master of mechanical engineering , I have a background in CATIA but not in CNC coding , do you have also other similar projects ? I also attached my C.V for you thank you very much for you attention
Hello I noticed your post about the CNC project , could I please ask you , that if I live in Italy as a student , I can work for you or not ? I study master of mechanical engineering , I have a background in CATIA but not in CNC coding , do you have also other similar projects ? I also attached my C.V for you thank you very much for you attention
CATIA V5 users. Project will involve, Injection moulding, Sheet metal, Kinematics, Drafting. more details will be provided through PM. Must have good portfolio/Projects worked on in these fields.
For this project, you’ll prepare an AutoCAD drawing representing a plat map of a new subdivision called Oleson Village. A plat map is a drawing that shows such actual and planned features as streets and building lots. Your plat map will also show the location of trees, both those that will be saved (52) as well as those to be removed (13). Data for the drawing wi...some practice in annotating a drawing with text. I think that since this has already been done in other versions of Autocad, it should be as easy as opening it in 2013 and doing a "save as". I don't know Autocad, but we do this with different verisions in Unigraphics (UGNX) (we just upgraded from NX6 to NX8 over the holidays and everything still opens without problems) and Catia...
For this project, you’ll prepare an AutoCAD drawing representing a plat map of a new subdivision called Oleson Village. A plat map is a drawing that shows such actual and planned features as streets and building lots. Your plat map will also show the location of trees, both those that will be saved (52) as well as those to be removed (13). Data for the drawing will co...is some practice in annotating a drawing with text. I think that since this has already been done in other versions of Autocad, it should be as easy as opening it in 2013 and doing a "save as". I don't know Autocad, but we do this with different verisions in Unigraphics (UGNX) (we just upgraded from NX6 to NX8 over the holidays and everything still opens without problems) and Catia...
can a proper expert in CATIA V5 please get in touch. lts a year 1 coursework not very hard. Just for compatability purposes please send me a small CATIA file so I can check. l use Catia v5 R18. Please dont get in touch if you are not an engineering expert. find attached the problem, if you can do it please ensure you send me a trial file like explained earlier, this is to check compatability with my version of CATIA can pay 30$
For this project, you’ll prepare an AutoCAD drawing representing a plat map of a new subdivision called Oleson Village. A plat map is a drawing that shows such actual and planned features as streets and building lots. Your plat map will also show the location of trees, both those that will be saved (52) as well as those to be removed (13). Data for the drawing will co...is some practice in annotating a drawing with text. I think that since this has already been done in other versions of Autocad, it should be as easy as opening it in 2013 and doing a "save as". I don't know Autocad, but we do this with different verisions in Unigraphics (UGNX) (we just upgraded from NX6 to NX8 over the holidays and everything still opens without problems) and Catia...
For this project, you’ll prepare an AutoCAD drawing representing a plat map of a new subdivision called Oleson Village. A plat map is a drawing that shows such actual and planned features as streets and building lots. Your plat map will also show the location of trees, both those that will be saved (52) as well as those to be removed (13). Data for the drawing wil...practice in annotating a drawing with text. I think that since this has already been done in other versions of Autocad, it should be as easy as opening it in 2013 and doing a "save as". I don't know Autocad, but we do this with different verisions in Unigraphics (UGNX) (we just upgraded from NX6 to NX8 over the holidays and everything still opens without problems) and Catia...
