Find Jobs
Hire Freelancers

PCB Board Design for SATA SAS Connector

$15-25 USD / hour

Closed
Posted over 5 years ago

$15-25 USD / hour

We need a PCB Board designed including schematics, gerber file and BOM to supply to a rapid prototype. The board is a SAS to SATA single backplane that is used to connect a hard drive to a sata cable that interacts through our software using an HBA card. Attached is an image of cards that I currently use. They are pretty simple as they are a pass through for the hard drive to send data to SATA cables. I would like to customize the board slightly by adding a resettable fuse on the back of the power connector to handle surges incase a bad hard drive is plugged in. I would also like to see if it is possible to add a controllable relay to the power portion that would allow the ability to disconnect the power via Arduino or another microprocessor. The goal is to have banks of 15 setup and up to 105 PORTS setup where I can more control of the process and regulate power issues if there are any. Please apply if you have this experience and you can provide great suggestions.
Project ID: 18348536

About the project

14 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
14 freelancers are bidding on average $24 USD/hour for this job
User Avatar
Dear Sir. I am very interested in your project and I would be happy to work on it. I am a Senior Electronic Engineer with experience in the design / development of embedded systems implemented with DSP, FPGA and Microcontrollers. In my 6+ years of experience in the Aerospace and IoT industries, I worked in electronic/circuit design, PCB layout, embedded C programming and digital design. I can first analyze your requirements and research possible design options and choose the most appropriate for your application. I can do all the electronic (circuit design, schematics development and PCB Layout ) for your product. The electronic design will focus on: low power consumption, lower cost (minimum number of components), reduced size. I love working on complex designs, it motivates me. I have the skill to solve problems, the rapid understanding of what is required, seriousness and responsibility to carry out the work in the best way. I would like to know more details about your project. I am new to the freelance platform, but I am sure that I am the professional who can do this job. You can trust that I will give my best to deliver a work that exceeds your expectations. Thanks for your consideration Best regards
$22 USD in 40 days
5.0 (4 reviews)
8.4
8.4
User Avatar
Hello, I am an electrical engineer and expert in circuit design and PCB layout. I have been using Altium Designer for 7 years, I can submit you following results. - schematic circuit design & BOM - PCB layout, gerber, drill, PnP, 3D STEP files - circuit simulation if you want - 3D enclosure design ... Eagle, KiCAD, Protel, Allegro are all possible ECAD for me. Looking forward to having opportunity to discuss on your project. Thank you.
$44 USD in 40 days
4.9 (26 reviews)
7.3
7.3
User Avatar
I am an engineer, I have successfully executed many engineering task than you can ever imagine both on freelancer and off freelancer. It will be a pleasure working with you on this one Sir. Thanks
$15 USD in 1 day
4.8 (14 reviews)
4.8
4.8
User Avatar
I have more than 5 years experience in embedded systems and PCB design with eagle and altium design software . so I can do your job within a time limit with your satisfaction.
$33 USD in 30 days
4.8 (8 reviews)
4.9
4.9
User Avatar
Hi! Your proposal looks interesting and we will gladly assist you with it. How about short call in order to discuss all details?
$25 USD in 40 days
5.0 (2 reviews)
4.2
4.2
User Avatar
Hello, We have 15 years of work experience in manufacturing and have worked extensively in china, Apac countries and India. We have a Team of Designing and Developing Electronics Projects and have good experience is designing Multilayer PCB with greater experience in the relevant field. Also you can see, My Expertise: • Multilayer PCB up to 8 Layers • Mixed signal board • Motherboards • RF Modules • Power Supplies • Taken care of EMI/EMC guidelines, Thermal effects, and signal integrity. Our past product experiences includes: - Communication products on (Bluetooth, WI-FI, GSM-2g/3g/4g with and without GPS, Lora, SIGFOX) - Communication protocols like TCP/IP, MQTT, HTTP, MODBUS. - Commercial products (fully automatic top loading washing machine with fuzzy logic, smart microwave over, BLDC fans and compressor drives for air conditioners, Led lightings-home down lights, smart bulbs and tube lights, solar street lights and high bay lights) - Automotive products (tire pressure management systems, OBD2, Bluetooth for infotainment, ev charging stations, BLDC drives, Battery management systems) We have a production capacity to support international quality standards of production. We hence request-fully submit our proposal for your evaluation and reassure you of our quality and promptness. We also are willing to sign a long term freelancer support contract for your future needs as well. Awaiting your response. Regards, Mihir
$25 USD in 40 days
5.0 (2 reviews)
4.4
4.4
User Avatar
Hi, I'm experienced embedded firmware and hardware developer. I specialize in wireless communication (BLE, 3g/4g, LoraWAN, Sigfox) hardware and firmware. I can design the boards and code drivers and business logic in embedded C. Recently I've developed fully certified Sigfox based IoT product for another customer so I'm familiar with the whole development flow. I also routinely use 3/4g modems from Quectel and Simcomm in my designs. Let's talk more about your requirements to see how I can help. I am also an expert in miniaturization, you can meet for my portfolio and Smablo project I've done designs that were mass produced for examples see Smablo project in my portfolio. All Smablo components were mass produced based on my design and assembly documentation As a part of my usula services I provide complete mechanical documentation of the design including 3d model of assembled board. As for PCB design this is a part of my service package. In my experience spiting project between drawing schematics and routing boards leads to subpar results. I provide the following: * establishing project specification * selection of components * electrical schematics * PCB layout and Gerber files for the fab of your choice * assembly documentation * 3d model of assembled board During lifetime of my startup company Smablo I've worked on a projects for a few notable companies like Intel, Samsung Poland, Orange Poland and many others. We've provided a complete package designing product from
$27 USD in 40 days
5.0 (1 review)
3.4
3.4
User Avatar
I have 7 years experience on PCB design. Hope will work with you on this project. Thanks, Khanh Tran
$15 USD in 40 days
5.0 (3 reviews)
1.6
1.6
User Avatar
Hello I'm electrical engineer with vast experience in PCB design. I use eagle designer but It seems that you will need to install high speed transmission lines in PCBs that will require better design tools. Which design tool do you pretend to use? Best Regards Arthur
$22 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have a PhD in Electrical Engineering from UCSB and I have done multiple link projects similar to this one during the course of my work. It is a simple project. Relevant Skills and Experience I have 5 years of experience design high speed PCB.
$22 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have broad understanding of electronics and PCB designed. I hv 6+ years of experience in ALTIUM PCB designer. I will make you changes on your board as you are asking. Award me this project Relevant Skills and Experience Electronics, embedded firmware software development, embedded C, C++, C# and python programming. PCB design for SL/DL/ML. Bluetooth, RF, Xbee, WiFi ,GSM ,IoT projects. Matt , Websocket, android, iOS
$22 USD in 6 days
0.0 (0 reviews)
0.0
0.0
User Avatar
A young Ukrainian software development company that employs several passionate engineers. Our main direction is the engineering, development and implementation of custom software with a deep scientific focus that requires strong skills in mathematical and natural sciences. The technical leadership of the company is held by two keen scientists with Ph.D. degrees in physics, mathematics and technical sciences. During the last 5 years we have been involved in several projects related to cloud computing, math libraries, machine learning, parallel computing, CAD/CAE, engineering drawing, production costing, computer vision, remote device control, brain physics modeling, natural language processing, satellite imagery and more. We use MPI, OpenMP, COM and other technologies while working in C++, C#, Python, Matlab, Java, Mathematica and other languages. We develop applications for Windows, Linux and Android. We would be happy to take care of your boldest and most complicated projects!
$22 USD in 40 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of JAPAN
Japan
0.0
0
Member since Dec 13, 2018

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.