Wanted assembler custom jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    982 wanted assembler custom jobs found, pricing in NZD

    I need to create a maze-type game in a program writting the program in ASSEMBLER. The game should respond to keyboard input and move at least one character player avatar through a maze built with ASCII characters. The maze should have 3 levels only, once you pass one maze you pass to the next one. There is not time limit. There is not menu. It

    $74 (Avg Bid)
    $74 Avg Bid
    3 bids

    ...preprocessed on the hardware and stored in onboard memory for further retrieval. The device is battery operated. There is an optical IR interface and RS485 port to communicate with custom software which runs on PC. . The hardware consists of multiple PCBs which are divided by functionality and connect together inside a water-tight, metal housing. There are

    $2005 (Avg Bid)
    $2005 Avg Bid
    21 bids

    ...going to be most likely orientative in order to get some contacts and discus later. Some important knowledges to keep in mind: Reversing, Process dll injection, ASM, Low C assembler level, understanding about memory reading / writing with offsets interpretation and hooks and then being able to build functions in order to manage all the information from

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    6 bids

    ...going to be most likely orientative in order to get some contacts and discus later. Some important knowledges to keep in mind: Reversing, Process dll injection, ASM, Low C assembler level, understanding about memory reading / writing with offsets interpretation and hooks and then being able to build functions in order to manage all the information from

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    8 bids

    ...or equivalent work experience • Experience in CICS Systems support, proficient with CICS system dumps as well as CICS System internal and CICS interfaces. • Knowledge in Assembler, COBOL and/or REXX (jvs comment - the "and/or" statement in here is odd ... it's difficult to orchestrate CICS functions from REXX)) • Expertise with the following: z/OS,

    $53 / hr (Avg Bid)
    $53 / hr Avg Bid
    7 bids

    this is a 2 pass assembler in C++ would like to have in C

    $178 (Avg Bid)
    $178 Avg Bid
    13 bids

    So I have about 1200 lines of code written. I need you to go in and fix a few errors I am having to make the code whole again.

    $203 (Avg Bid)
    $203 Avg Bid
    14 bids
    2 pass assembler Ended
    VERIFIED

    ...the symbol table. At the end of the pass, the symbol table should be printed, showing each symbol together with its location. This pass must also recognize and handle the assembler mnemonics in addition to the directives START, END, BYTE, WORD, RESB, and RESW. It should also be able to recognize the following types of errors (note that this is not an

    $321 (Avg Bid)
    $321 Avg Bid
    12 bids

    I need someone to either write pass 2 of the assembler from scratch for me, or take my code and fix the errors in it for pass 2.

    $269 (Avg Bid)
    $269 Avg Bid
    5 bids

    Disassemble Freescale MPC5674F hex file to assembler. IDA PRO, winhex is a must!

    $3179 (Avg Bid)
    $3179 Avg Bid
    11 bids

    i have a simple C language code. if you C language and Assembler expert, you will help me.

    $39 (Avg Bid)
    $39 Avg Bid
    12 bids

    ...4*R0, set R4 to 5*R0, set R5 to 6*R0, set R6 to 7*R0 and finally set R7 to 8*R0. What you have done might be coded in assembler as: MOV 7, R0 MOV 7(R0),R1 MOV 7(R1),R2 MOV 7(R2),R3 Etc. There are other ways of doing this in assembler – the above is just one example. I need to see you doing some register transfers and also see you use the ALU. It is NOT

    $58 (Avg Bid)
    $58 Avg Bid
    1 bids

    Knowledge of the programming language C ++ assembler

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    19 bids

    The Modul is an electronic relay used for switching of transformers. It can switch on one or multiple single-phase transformer with or without load. Due to the soft st...mains interruption ac- cording to DIN EN 61000-4-11. As a result no current surges occure when operating a transformer. Hardware is done, software needed. PIC18F25K22 assembler

    $6490 (Avg Bid)
    $6490 Avg Bid
    2 bids

    ...BIN file. I do not have the source code. Currently, only one serial number works of smart card. I need to make a modification for another serial number and to change it in assembler. so We can agree as follows: the software only responds to the serial number to be exchanged. for other word----> I need to make a change for another card serial number

    $80 (Avg Bid)
    $80 Avg Bid
    1 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $705 (Avg Bid)
    $705 Avg Bid
    4 bids

    We require an electronic engineer who is skilled in: FPGA Programming (VHDL) PicoBlaze embedded processor (Assembler) DWIN Technology TouchScreen

    $44 / hr (Avg Bid)
    $44 / hr Avg Bid
    7 bids

    I'm looking for programers, who be able to write small bootloader in assembler language, moreover this loader should be less then 512 bytes. Loader must be designed for satteliter receiver based on STI7100 microprocessor (SH4 architecture) This program have to initialize RAM memory and load from uart intereface u-boot file (I have prepared uboot for

    $494 (Avg Bid)
    $494 Avg Bid
    2 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $44 - $365
    $44 - $365
    0 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $44 - $365
    $44 - $365
    0 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $44 - $365
    $44 - $365
    0 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $622 (Avg Bid)
    $622 Avg Bid
    1 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $34 - $280
    $34 - $280
    0 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $34 - $280
    $34 - $280
    0 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $34 - $280
    $34 - $280
    0 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $34 - $280
    $34 - $280
    0 bids

    I need you to develop some software for me. I would like this software to be developed . Create an assembler program, visual studio

    $38 (Avg Bid)
    $38 Avg Bid
    4 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $219 (Avg Bid)
    $219 Avg Bid
    1 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $44 - $365
    $44 - $365
    0 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $174 (Avg Bid)
    $174 Avg Bid
    1 bids

    Hi If you are expert x86/x64 Assembler BIOS Image. then bid this task. also more details on attach file here.

    $124 (Avg Bid)
    $124 Avg Bid
    1 bids

    Assembler commands and assembler program

    $42 (Avg Bid)
    $42 Avg Bid
    10 bids

    I'm looking for programers, who be able to write small bootloader in assembler language, moreover this loader should be less then 512 bytes. Loader must be designed for satteliter receiver based on STI7100 microprocessor (SH4 architecture) This program have to initialize RAM memory and load from uart intereface u-boot file (I have prepared uboot for

    $223 (Avg Bid)
    $223 Avg Bid
    5 bids

    Hi Ashish S., A...and that you'd be able to provide the Source code for $111. I am interested, let me know the best way to proceed. I am also interested in what was used to code it and the assembler used to make the executable. Also I look forward to working with you in further optimizing and automation things once AMZFoster is sold. Thanks, Vijay

    $161 (Avg Bid)
    $161 Avg Bid
    1 bids

    You have to write an optimized 6809 assembler function to draw vector lines on a Vectrex game console. Attached is the full project. You can open and run it with the Vide IDE: [login to view URL] When opening the project in Vide, you can start it with the play button in the Vedi toolbar. Then you can click in the vecxi window, and press

    $213 (Avg Bid)
    $213 Avg Bid
    5 bids

    ...a PICkit 3 with MPLAB's IDE v3.65 to download the old program. My problem is downloading the assembler file I have for conversion as a HEX file using MPLAB IDE v3.65. I am missing the appropriate instructions that would take me from uploading the assembler file into IDE, then converting it to the HEX file I can download via the PICkit 3 to my 16F84a

    $51 (Avg Bid)
    $51 Avg Bid
    2 bids

    easy task that won´t take too much time for an expert to solve like 30 min. the project is due to tuesday night 16/01/2018 23h GMT

    $47 (Avg Bid)
    $47 Avg Bid
    3 bids

    I need someone to track x3 stereoscopic 8k shots that were captured on a GoPro Odyssey and stitched on the Jump Assembler. These are each 50, 65 & 85 seconds long. I can supply links to the raw footage (8k & 2k proxys) + in and out points. I need the track data in After Effects CC 2017 or 2018 so I'd expect you to use the VR Comp Editor and AE Camera

    $739 (Avg Bid)
    $739 Avg Bid
    5 bids

    I need you to develop some software for me. I would like this software to be developed . 8051 assembler , dc motor drive with pwm. It should have 3 inputs for count up and down varying the duty cycle and one pin for counterclockwise rotatio. It also should be configured by three outputs of a PLC(programmable logic controller) and the display should

    $41 (Avg Bid)
    $41 Avg Bid
    1 bids

    I need a small project for school in assembler language for microcontroller Z80. The project consist in code for programming a juicy machine.

    $48 (Avg Bid)
    $48 Avg Bid
    4 bids

    I'm looking for programers, who be able to write small bootloader in assembler language, moreover this loader should be less then 512 bytes. Loader must be designed for satteliter receiver based on STI7100 microprocessor (SH4 architecture) This program have to initialize RAM memory and load from uart intereface u-boot file (I have prepared uboot for

    $180 (Avg Bid)
    $180 Avg Bid
    2 bids

    Poszukuję programisty, który będzie w stanie napisać mikro program (najlepiej do 512 bajtów) dla dekodera z procesorem STI7100 (architektura SH4). Program ma zainicjować pamięć ram, wczytać przygotowanego przeze mnie uboota z uartu i zapisać go w pamięci flash (NOR) dekodera.

    $272 (Avg Bid)
    $272 Avg Bid
    2 bids

    I need to convert a small C file to AVR assembler language as well as a brief explanation of how the code works

    $41 (Avg Bid)
    $41 Avg Bid
    1 bids

    It is to Write an Assembler Program which is Utilizing the irvine32 library. will provide the details later.

    $58 (Avg Bid)
    $58 Avg Bid
    1 bids

    NASM, is an 80x86 and x86-64 assembler designed for portability and modularity enun Implement a program that decodes an array of strings encoded by different cryptographic methods. Structure and implementation details This assignment is made up of several subsections, each subsection comprising decoding a number encoded by a specified method

    $37 (Avg Bid)
    $37 Avg Bid
    1 bids

    for NASM, is an 80x86 and x86-64 assembler designed for portability and modularity Implement a program that decodes an array of strings encoded by different cryptographic methods. This assignment is made up of several subsections, each subsection comprising decoding a number encoded by a specified method. Paragraphs can be solved independently, but

    $117 (Avg Bid)
    $117 Avg Bid
    2 bids

    A freelancer is required to write a waveform compression/expansion routine in x86 assembler. The program will read a file containing N samples of a waveform. The waveform will be modified by an arbitrary quantity given in Hz. The waveform processing will be done in the frequency domain. A subset of the waveform will be saved to a file at completion

    $292 (Avg Bid)
    $292 Avg Bid
    2 bids

    Task Write a piece of 6502 or 65C02 assembler that - Prompts the user to enter a 3 digit number between 0 and 255 Reads in the number as ASCII characters Converts the ASCII characters into an 8 bit decimal number Writes out the decimal number as a binary number Writes out the decimal number as a hexadecimal number Hints You may presume

    $21 - $41
    $21 - $41
    0 bids

    A freelancer is needed to write a legacy utility in x86 assembler. The program will reconstruct a binary serial data stream from a set of analog samples in a file. Some type of "best fit" strategy needs to be used. Please see attachment for details.

    $250 (Avg Bid)
    $250 Avg Bid
    5 bids