Mould design solidwork jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,273 mould design solidwork jobs found, pricing in NZD

    ...the most modern light weight hollow clay blocks. Types of products we deal in: • Traditional Bricks • Extruded Bricks • Cladding Bricks • Fly Ash • Rubber Mould Paver • Rubber Mould Tiles • Brick Clay • Block Clay We also customize bricks as per specific requirements. We believe we are an integral part of our society, close...

    $57073 (Avg Bid)
    $57073 Avg Bid
    4 bids

    2D & 3D models and Different scatches...

    $22 (Avg Bid)
    $22 Avg Bid
    48 bids

    Work for Mould design for Aluminium pressure die casting model, with detail Before that to start with, I have the part built already. It needs to be analysed first with any analysis software for temperature/strength at concentrated point for efficiency. As these are the products (housings) for LED Castings. CAD CAE, 3D Modeling and analysis knowledge

    $166 (Avg Bid)
    $166 Avg Bid
    15 bids

    ...entrepreneur and furniture designer for my own, new furniture brand. I’m looking for a proof 3D animator, who are able to make photo-realistic work based on my 3D models created in SolidWork. The work could include the following: Job A: 3D rendering of furniture in photorealistic quality with the right material and texture. I should receive the final work as:

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    Hello we are looking to creat...Each hosting their own wordpress theme that helps us mould (as layman as possible) the ocntent we wish to host. We're looking for someone who can help us setup the wordpress installation and subdomains optimally with the set themes under each domain - enabling our content creators to then upload/mould/edit as required.

    $537 (Avg Bid)
    $537 Avg Bid
    109 bids

    we are in need of somebody help correcting some solidwork file. we will give 300 usd for this work. but can not open the solid work file now, so interested party pls convert the solidwork file into flattern jpg file first so we will tell you how to make the correctoin. this is download link [login to view URL]

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    65 bids

    Product of three part need to be draw by using solidwork

    $205 (Avg Bid)
    $205 Avg Bid
    57 bids

    ...consulting business. I have a number of businesses which have Paragon in their name. One of them is Paragon Technology Resources. I would like to have a logo for it in the same mould as the logo of my business called Paragon Recruitment Services. Same colours ...Same shape....same everything ....just the words "Recruitment Services" replaced by the words

    $28 (Avg Bid)
    $28 Avg Bid
    66 bids

    We need the expert for Solidwork Required works. : Modification of current design - Material : Steel - Parts : 1) plate for motor 2) cover for gear

    $159 (Avg Bid)
    $159 Avg Bid
    155 bids

    we need to get designing of mechanical engineering projects. Need a person who can understand the concept and design accordingly

    $178 (Avg Bid)
    $178 Avg Bid
    89 bids

    the aerodynamics of a windturbine

    $57 (Avg Bid)
    $57 Avg Bid
    3 bids

    ...platform scales in Saudi Arabia. We plan to enter the Truck Weighbridge business. We need someone to consult with to provide deign assistance for different weighbridge structure design whenever we have a new inquiry. We have a metal fabrications factory that can convert designs to final weighbridge projects with advice and consultancy from your side. Bellow

    $791 (Avg Bid)
    $791 Avg Bid
    12 bids

    Hi, i have 5 pieces of metal frames with holes which need to draw using a 3D software (save as .stl format). Please mention also the ...which need to draw using a 3D software (save as .stl format). Please mention also the software you will use when you bid this project. e.g. solidwork, proE... Selected designer will be given dimension and design. tq

    $36 (Avg Bid)
    $36 Avg Bid
    29 bids

    I need to a 3d mold design for plastic toys.

    $236 (Avg Bid)
    $236 Avg Bid
    44 bids

    Make a P-51 Mustang airplane in Solidworks. You wil...Everything need to be made and delivered as SolidWorks 2017 or Earlier Versions with the complete feature tree. No other format will be accepted. This project require knowledge of Solidwork Surface. This is a simple and straightforward project: all bids above 300CAD will be ignored. Scale: 1/56

    $594 (Avg Bid)
    $594 Avg Bid
    55 bids

    I need a very simple 3D model of a toy-car. I t has to be made considering that the CAD model (final format should be .igs or .stp) will be then used to make the mould for die-casting manufacturing, so paying attention to minimum radius and draft angles is also required. It is not for virtual reality, so no textures or rendering effects are required

    $36 (Avg Bid)
    $36 Avg Bid
    7 bids

    we want plastic injection moulds to be designed

    $120 (Avg Bid)
    $120 Avg Bid
    37 bids

    Scale: 1/56 You will be provided with blueprints and reference im...Everything need to be made and delivered as SolidWorks 2017 or Earlier Versions with the complete feature tree. No other format will be accepted. This project require knowledge of Solidwork Surface. This is a simple and straightforward project: all bids above 300CAD will be ignored.

    $355 (Avg Bid)
    $355 Avg Bid
    46 bids

    ...Cad software starting top right and cutting from there. Then make the reverse with the mould, and an insert that is roughly 1/4" smaller all around to insert into the mould and centre. We should then set up that DXF file to cut the part inside the larger mould to not waste product or foam. We have roughly 300 shapes like this to do. There are

    $1319 (Avg Bid)
    $1319 Avg Bid
    14 bids

    ...Cad software starting top right and cutting from there. Then make the reverse with the mould, and an insert that is roughly 1/4" smaller all around to insert into the mould and centre. We should then set up that DXF file to cut the part inside the larger mould to not waste product or foam. We have roughly 300 shapes like this to do. There are

    $1147 (Avg Bid)
    $1147 Avg Bid
    6 bids

    We are looking for a mechanical engineer to make the design of a machine for peeled pistachios on SolidWork. We have an idea of the design of the machine but your role will be to improve the design in order to maximize its efficiency.

    $475 (Avg Bid)
    $475 Avg Bid
    58 bids

    I am looking for a solidwork designer for designing my chassis

    $31 (Avg Bid)
    $31 Avg Bid
    36 bids
    $15 Avg Bid
    1 bids

    Plastic mould designer wanted on project of a collapsible box. 4 moulds needed

    $461 (Avg Bid)
    $461 Avg Bid
    34 bids
    Trophy icon Box for white goat cheese Ended

    ...a small coat farm in Europe, Estonia and we need a carton box design for our white cheese. The box has to fit cheese with dimensions height 3cm and diameter 8,5cm. The box must be easy to fold, stylish, modern and eye-catching. The product is aimed to local Estonian market, so the design has to be in estonian language. I attached the photo of our

    $262 (Avg Bid)
    Guaranteed
    $262
    28 entries

    ...sugar until well dissolved and cool. Break eggs into a deep dish, lightly whisked and add milk. Pour mixture into a mould previously caramelized with sugar and a little water and cover with tin foil so no steam escapes. Place mould in cooker with water up to approx. half its height. Close and cook for 4-5 minutes. GENERAL INDICATIONS Pressure

    $12 (Avg Bid)
    $12 Avg Bid
    1 bids

    Scale: 1/56 You will be provided with blueprints and reference im...Everything need to be made and delivered as SolidWorks 2017 or Earlier Versions with the complete feature tree. No other format will be accepted. This project require knowledge of Solidwork Surface. This is a simple and straightforward project: all bids above 300CAD will be ignored.

    $408 (Avg Bid)
    $408 Avg Bid
    60 bids

    I’m looking for someone to take. Image of a finger print of my late Mother and create a 3D mould that can then be used to transfer the actual finger print to a clay mould to create a piece of jewlery as a keep sake for my family to remember our Mother, the image was take using Garda finger print ink and is in a flat surface, so a high Rest image will

    $251 (Avg Bid)
    $251 Avg Bid
    67 bids

    ...for designing an enclosure (Parking Sensor Enclosure design) for an Electronic/PCB project that we have recently completed. Please refer project description as listed below prior sending me you proposal. Project Requirements: • Based on our specifications we need a 3D designer to finalize a design (Fusion360 preferably) which will be in 2 or more parts

    $111 (Avg Bid)
    $111 Avg Bid
    43 bids

    To design a mould for the manufacture of a composite [login to view URL] select the appropriate tools, feeds and speeds for the machining process. To use CAD/CAM tools to visualise the machining process and generate the toolpaths and NC code required to efficiently machinea mould

    $197 (Avg Bid)
    $197 Avg Bid
    6 bids

    Drawing and dimensions for small device made from plastic. This device will be placed in urinals and workers will urinate in the top of it. Urine colour will be assessed behind clear screen and drain away through holes in the bottom. A temperature sensitive sticker will be placed at the top to record urine temperature.

    $97 (Avg Bid)
    $97 Avg Bid
    32 bids

    To design a mould for the manufacture of a composite shell. To select the appropriate tools, feeds and speeds for the machining process. To use CAD/CAM tools to visualise the machining process and generate the toolpaths and NC code required to efficiently machine a mould. You are required to use CAD/CAM software (hyperMILL) to generate tool paths for

    $262 (Avg Bid)
    $262 Avg Bid
    15 bids

    Hi Product Designer/CAD/CAM, I noticed your profile and would like to offer you my project. We can di...project. We can discuss any details over chat. I am looking for a suitably capable and qualified person to run an FEA on an 8.0m diameter fiberglass dome that will be used as a mould for a 100mm concrete shell. Is that something you feel you can do?

    $75 / hr (Avg Bid)
    $75 / hr Avg Bid
    1 bids

    ...Engineers. It's an Iso 9001: 2015 certified Indian Company Manufactures Various Types of Injection molded Plastic products, plastic Mechanical or engineering Components & Injection Mould designing and production of Injection Moulded Plastic Items, We also Undertake OEM services. We are planning to expand scope of our business overseas by Exporting our Product

    $809 (Avg Bid)
    $809 Avg Bid
    9 bids

    I would like to hire on an individual who has the expertise to create a two part 3d model of the attached file. Both parts of the mould should fit together using the outlined matching points as well as be to the scale specified. The intention would be to print the finished model by way of a 3d printer. Thanks for your time and consideration.

    $218 (Avg Bid)
    $218 Avg Bid
    95 bids

    I am a pastry chef and would like to make 1 3D cake mold however I do not know how to use Rhino 5 or 3D max to draft out the mould .

    $117 (Avg Bid)
    $117 Avg Bid
    22 bids

    Make a Mitsubishi Zero Model 21 airplane in Solidworks. Scale 1/56 You ...need to be made and delivered as SolidWorks 2017 or Earlier Versions with the complete feature tree. No other format will be accepted. This project need to be created using SolidWork surface. This is a simple and straightforward project: all bids above 300CAD will be ignored.

    $334 (Avg Bid)
    $334 Avg Bid
    31 bids

    I need someone to design me a product in solidwork or similar software.

    $635 (Avg Bid)
    $635 Avg Bid
    184 bids

    I need a 3D model of something. I can do modelling.i have knowledge of autocad,catia,solidwork. I know [login to view URL],marati language. I m a mechanical engineer

    $39 (Avg Bid)
    $39 Avg Bid
    12 bids

    Hi Looking for meachncial experienced designer who can develop industrial prototype plant having high temperature application machines and mould design. Experience needs in : MOULD DESIGN, MATERILS SELECTION, TEMPERATURE CONTROL, MODELING OF MACHINES FOR PLANT, MATERIAL TAKEOFF, POWER CONTROL, HYDRAULIC MACHINES

    $648 (Avg Bid)
    $648 Avg Bid
    63 bids

    ...think that you can handle this project, then give a realistic bid. In the answer text please answer the following 3 Questions: 1. Do you have the possibility to work with SolidWork 2018, if not what will be you alternative. 2. Describe in 2-3 sentences the main objective of this project just to proof that you have read the entire document and that you

    $1319 (Avg Bid)
    $1319 Avg Bid
    38 bids

    I need a 2016 solidworks file redesigned for injection moulding. I need tabs put on it to screw and i need it split down the middle and the wall thickness cleaned up to a moulding standard. I have a step file for viewing and i need this done for chinese manufacturing

    $241 (Avg Bid)
    $241 Avg Bid
    59 bids

    Mechanical design engineering jobs

    $510 (Avg Bid)
    $510 Avg Bid
    46 bids
    Trophy icon Design project Ended

    I need some graphic design. We are a water and fire Restoration company We need some icons desiged for the following Water/Flood Restoration fire Restoration Mould remediation contents (house Contents) specialised Services Thank you

    $105 (Avg Bid)
    Guaranteed
    $105
    18 entries

    We have some designs in "solidwork". we need someone to do manufacturing and assembly pictures.

    $3467 (Avg Bid)
    $3467 Avg Bid
    36 bids

    I need some graphic design.

    $169 (Avg Bid)
    $169 Avg Bid
    3 bids

    ...bigger quantities (because of shipping costs, logistic , etc.). with the help of our partners we are also able to provide following services: injection moulding injection mould design and manufacturing casting (aluminum, cast iron, cast steal) laser/plasma cutting welding product assembly and testing etc... terms of payment will be discussed with

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    6 bids

    I need cam work for my mould. Need to generate guide.

    $150 (Avg Bid)
    $150 Avg Bid
    24 bids

    I'm trying to get a device designed for my undergrad project.

    $166 (Avg Bid)
    $166 Avg Bid
    57 bids

    For our new generation blackbox we are looking for a solidwork pro who can continue with the design and adjusments to our new blackbox model. Blackbox is a portable broadcast tool for event video and photo.

    $613 (Avg Bid)
    $613 Avg Bid
    40 bids