Car designer autocad jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    7,165 car designer autocad jobs found, pricing in NZD

    Three AutoCAD 2018 files need to be recreated with watertight solids. The files consist of lines, SPlines or Blocks.

    $623 (Avg Bid)
    $623 Avg Bid
    23 bids

    looking for someone to do my setting out plan of coordinates of hard materials used on my masterplan. 2 hours work £25 an hour. must be completed by Sunday.

    $148 (Avg Bid)
    $148 Avg Bid
    26 bids

    i am a dental profession and I have designed a tool which I need to design and print, I am in my initial phases and would need and initial consult and design for prototype(s) which can be printed or manufactured on a large scale.

    $243 (Avg Bid)
    NDA
    $243 Avg Bid
    14 bids

    I need someone that either today or tomorrow can draw lines over SPlines for 2 3D Autocad 2018 files (description of works will be given). It is a repetitive job (example attached: red lines to ouline the possition of columns/beams) Alternative: to convert the SPlines to simple lines and clean the files. A good laptop to open and easily work with the

    $225 (Avg Bid)
    $225 Avg Bid
    13 bids

    I have done hundreds of projects in autocad as draftsman like your rough paper drawing convert into cad file and as a Plumbing draftsman.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    54 bids

    I have a 2BHK apartment, and I am looking for someone who can design the interiors in 3d Software.

    $175 (Avg Bid)
    $175 Avg Bid
    37 bids
    Custom Pattern for Autocad 4 days left
    VERIFIED

    We need a custom Autocad pattern file that follows a custom geometry. The file supplied shall be a ".PAT" and be possible to be used in Autodesk Revit. Please look at the attached Autocad file that shows geometry that the pattern shall be based from. It is basically squares that overlap in 1 corner. It is allowed to make minor geometric adjustments

    $36 (Avg Bid)
    $36 Avg Bid
    12 bids

    Project Title: Isometric Drawing of Wire/Pipe in AutoCAD Software: AutoCAD Units: Inches What I have completed already: Isometric Drawing of Part To Be Completed By: 12:00AM- Eastern Time Zone: Negotiable Estimated Time to Complete: 1 Hour Details: -There are two wires/pipes which need to be drawn isometrically within the current part. -The wires

    $80 (Avg Bid)
    $80 Avg Bid
    7 bids

    I have a construction plan in electronicale form and didn't have the software autocad to change the mesures.

    $33 (Avg Bid)
    $33 Avg Bid
    24 bids

    I have knowledge of basic autocad.

    $29 (Avg Bid)
    $29 Avg Bid
    6 bids

    I am looking for AutoCAD expert who can make awesome...

    $156 (Avg Bid)
    $156 Avg Bid
    114 bids

    Require 2D Autocad Drawing measuring no more than 200 x 200 mm. The goal is to determine the maximum size Automobile that will fit in the garage. This task should take no more than 1 to 2 hours in billable time. 1 hour if your fast. 2 hours if your slow. Project due ASAP. This is a very fast and easy project if you know Autocad. Sale is 1 to 1

    $20 (Avg Bid)
    $20 Avg Bid
    39 bids

    Automate the block insert feature in Autocad and fixing the position of the block by giving distance and angle as input from the reference lines in the main drawing and finally mirror the inserted block. For positioning the block refer "Block insert left [login to view URL]" and "Block insert right [login to view URL]" images. The final drawing should be as per "f...

    $353 (Avg Bid)
    $353 Avg Bid
    29 bids

    I need a freelancer who could work as a part-time for my designs will be paid per project.

    $642 (Avg Bid)
    $642 Avg Bid
    4 bids

    Im looking for an draftperson proficient in AutoCAD to make some changes to a house i am looking to build. I already know what i want to draw but a bit hard to convey on paper so i would like to meet up and sit down together to make the changes with the draftperson.

    $60 / hr (Avg Bid)
    Local
    $60 / hr Avg Bid
    1 bids

    need basics training for autocad

    $32 (Avg Bid)
    $32 Avg Bid
    78 bids

    24 structural details drawings need to be redrawn by AutoCad. Most of them are not complicated.

    $149 (Avg Bid)
    $149 Avg Bid
    45 bids

    To create autocad drawing of existing hand drawn drawing of the electrification project. The hand drawings can have writings in Hindi. So only those who can read hindi may bid. The bidding should be per page. there is a tight timeline of delivery, so we need fast and timely delivery of committed Autocad drawings.

    $84 (Avg Bid)
    $84 Avg Bid
    66 bids

    Tank drawing with section needed

    $23 (Avg Bid)
    $23 Avg Bid
    62 bids
    AUTOCAD Ended

    need skilled AutoCAD workers for industrial design

    $21 (Avg Bid)
    $21 Avg Bid
    69 bids

    We need an architect that is able to create drawings to do plans for an residential home addition. The houses a living room, kitchen, dining nook, pantry and master bedroom suite. After get done drawings work, we also need 3D renders shot. I will share further information with selected Freelancer. Thank you

    $214 (Avg Bid)
    $214 Avg Bid
    53 bids

    We are an engineering company and we manufacture parts for Thermal Power Plants. Looking for an AutoCAD Draftsman who can help re-draw a few old drawings.

    $31 (Avg Bid)
    $31 Avg Bid
    81 bids

    Need a person to read AutoCAD files and help in the development of the products in the files.

    $38 (Avg Bid)
    $38 Avg Bid
    67 bids

    Please redaraw the attached file into a modern sleek looking engineering type diagram. Please remove all references of coke busters

    $45 (Avg Bid)
    $45 Avg Bid
    9 bids

    I have only a PDF file drawing of a part we used to make, but I need to make a proper (DWG) drawing, then update it with some changes and then to make drawing of tools to make it.

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    14 bids

    my project is related to sheet metal developement,

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    69 bids

    Hi all, Main objective is to convert PDF to AutoCAD. Standard layering to be included. 1 layer to be for Ducting. Will not be accepting bids more than SGD30. Good luck.

    $36 (Avg Bid)
    $36 Avg Bid
    27 bids

    To start with there is one drawing that is in analog format, i.e. scanned, that needs to be converted to a dwg-format. This means copying the drawing to Autocad. The drawing should be made up by different layers for: * Outer walls * Inner walls * Doors * Windows * Furniture

    $178 (Avg Bid)
    $178 Avg Bid
    25 bids

    Looking for expert AutoCAD MEP cad operator

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    40 bids

    Hi! We are looking for a absolute pro with AutoCad experience on interior drawings. Basically an empty floor should be partitioned. Sample drawings of one previously built floor is provided. Must be available on skype and be focussing on this project the next week until finished. Please do not bid if u are having too many projects.

    $20 / hr (Avg Bid)
    Featured Urgent
    $20 / hr Avg Bid
    38 bids

    Floor plan, elevation, Estimate, Blue print, photoshop editing and ms office any please call me

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    29 bids

    ...architectural skills to rearrange the rooms in order for it to fit. You are fluent in English, French or Dutch and you preferably work with a recent version of Autodesk AutoCAD Architecture (2016+). The final product should contain the drawings and a 3D model of the house. I would prefer if you could give an indication of estimated fixed project

    $1052 (Avg Bid)
    $1052 Avg Bid
    47 bids

    I am a start up business looking to have several thousand 13" plastic/resin dolls manufactured. In order to obtain accurate bids for the project, I need scaled drawings of the doll based on my artist renderings. I will provide the renderings once we agree on the terms. This is a simple project. Time is of the essence. I want to get started yesterday.

    $636 (Avg Bid)
    $636 Avg Bid
    54 bids

    I have drawing In Solid Works that need to be made into DXF files that I can use in AutoCad 2018. I would like someone to look at the files and give me a flat rate to do the work. The design of my product was professionally done and needs to be used to laser cut and bend stainless steel. I am changing manufacturers.

    $148 (Avg Bid)
    $148 Avg Bid
    24 bids

    Need one logo created for autoCAD

    $26 (Avg Bid)
    $26 Avg Bid
    42 bids

    2D drafting in AutoCAD and solid works 3D modeling

    $494 (Avg Bid)
    $494 Avg Bid
    68 bids

    Hello, everyone. I want to design a building with AutoCAD I want a very professional people. please start your proposal with your favourite football player. thanks

    $232 (Avg Bid)
    $232 Avg Bid
    114 bids

    I need a 3D terrain done in Rhino from an AutoCAD document that I have. I am attaching photos of the terrain and of what I potentially would need. It needs to be a clean 3D model as it will be later used for digital fabrication to do a model.

    $140 (Avg Bid)
    $140 Avg Bid
    31 bids

    Need a stl file (3d printable) of a small project created

    $32 (Avg Bid)
    $32 Avg Bid
    67 bids

    We are a furniture factory in Saudi Arabia. We need to outsource all aotucad and 3D designs. Scope of work will include sketching autocad and 3D for different types of furniture for marketing porpuses Types of furniture includes: Bedroom sets Workstations Sofa Chairs WoodworK

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    104 bids

    Our design and construction team is looking for an AutoCAD designer with at least 10 years of experience in Autodesk software to develop detailed mechanical design and electrical design (single line diagrams and electrical plans/sections) for a water treatment system. the design will be developed by engineers in the form of basic design concepts and

    $2092 (Avg Bid)
    $2092 Avg Bid
    20 bids

    I am looking for someone to design a simple part for me on autocad. Its basically like a paperclip, but a different shape.

    $36 (Avg Bid)
    $36 Avg Bid
    149 bids

    Hello, We are working with AutoCAD V2013 and we want to export data and manipulate it outside the software. We will work just with experienced developers.

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    34 bids

    ...software (hyperMILL) to generate tool paths for the machining of an aluminium (6061) mould for the manufacture of a composite shell for a remote control car. The design of the mould for the RC car is up to you but you must keep in mind design for manufacture issues relevant to this manufacturing method. The complexity of the shell will have no influence

    $264 (Avg Bid)
    $264 Avg Bid
    15 bids

    Hello, I am looking for an experienced AutoCAD< SolidWorks, 3D designer for my project. I will share details through the interview.. Thanks.

    $509 (Avg Bid)
    $509 Avg Bid
    145 bids

    we have to design a vehicle ,soft copy is ready

    $145 (Avg Bid)
    $145 Avg Bid
    35 bids

    Hello, we got 6 board to be drawned. I want to subdivide this 6 board in more than 1 freelancers. What we need it's to finish the board in 1 week. The job is to redraw in Autocad a 10k landscape. We need to draw streets, buildings some natural element like river or lake and agricultural fields where located. This work is simple we don't need too much

    $36 (Avg Bid)
    $36 Avg Bid
    33 bids

    Volumes with gable roof for creating a historic city

    $89 (Avg Bid)
    $89 Avg Bid
    40 bids

    We have attached the following FMC Single Press Tool Designs, and currently we are looking for freelancers whom are interested in doing fmc press tool designs like sample attached so and are well acquainted with these. we provide design jobs monthly basis whom can full fill our requirements of price, quality, lead time. kindly quote your competitive prices and lead time for this attached sample d...

    $203 (Avg Bid)
    $203 Avg Bid
    40 bids

    Hi, I have one task which needs to be done on Autocad, I need someone who can start asap and deliver it within few hours.

    $36 (Avg Bid)
    $36 Avg Bid
    83 bids