Byte time issue jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    2,760 byte time issue jobs found, pricing in NZD

    ...the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. ---> [login to view URL]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    7 bids

    ...modifications. The developing project has several issues: 1. The project, on wired test, runs until around 500k packets are received, then causes byte shift in the received data. The possible cause of this issue is in a PHY receiver – pre FIFO – RS decoder – post FIFO setup, the PHY receiver was originally checking post FIFO empty signal in previously

    $6720 (Avg Bid)
    $6720 Avg Bid
    23 bids
    Magento Optimization 1 day left
    VERIFIED

    I'm seeing pretty poor time to first byte on the site of about 5 seconds. A system call trace showed that this is entirely due to poorly optimized site code. It looks like your theme doesn't have any html block caching enabled. According to the php-fpm slow log, some of the bigger slowdowns are from these files: app/design/frontend/smartwave/porto

    $82 (Avg Bid)
    $82 Avg Bid
    16 bids

    Good Day, My Name is Sibusiso Mokganya and I'm from Byte Team which is an IT service provider in South Africa specialising in Software and Hardware Sales, Cloud Service Sales and Support, Complete IT Support, Network Cabling and CCTV Installations. The company started as a joint initiative between Myself and Eugene Zamani Zama (I've attached a company

    $289 (Avg Bid)
    $289 Avg Bid
    9 bids

    (A) A software than convert a 5Gb movie into either a Blob, Byte, Base64 or any other faster form in less than 5mins... for a mobile phone. (B) A reverse software would reverse the converted movie back to the same movie in less than 2min, 100% of quality

    $139 (Avg Bid)
    $139 Avg Bid
    5 bids

    end-user part of autoparts marketplace plus some fine tuning of vendor part.

    $378 (Avg Bid)
    $378 Avg Bid
    1 bids

    We need a static Java utility method which will take a byte array, then compress it into PP20 (PowerPacker) compressed data. We would do this ourselves if there was better documentation on the format. We spent quite a while searching for source code or even documentation for how to compress this format, although the only information we could find was

    $275 (Avg Bid)
    $275 Avg Bid
    5 bids

    My website loads fast, but it takes too long for the first byte, and it's noticeable, it takes at least a second for the page to start loading. I think it could be SQL or server poorly setup

    $54 / hr (Avg Bid)
    $54 / hr Avg Bid
    22 bids

    Hi Byte S., I noticed your profile and would like to offer you my project. We can discuss any details over cI need a changes o portfolio I have Source Files change menue Main Page Our projects About Us Contact Us and remove pricing checkhat.

    $15 (Avg Bid)
    $15 Avg Bid
    1 bids

    Time for first byte is long, website first click is very fast, but then it becomes slow It goes down suddenly for no reason frequently

    $65 (Avg Bid)
    $65 Avg Bid
    9 bids

    ...ultrasonic sound file based on an already existent library. The specific use case is well defined, is to transmit short text to the devices. This text needs to be encoded as a byte array and then transform it in to a 19.2 kHz frequency audio file, the file needs to be generated, and played. And a service in iOS, needs to be able to detect it and decode

    $320 (Avg Bid)
    $320 Avg Bid
    5 bids

    ...ultrasonic sound file. Based on an already existent library. The specific use case is well defined, is to transmit text to the devices. This text needs to be encoded as a byte array and then transform it in to a 19.2 kHz frequency audio file, the file needs to be generated, and played. And a service in Android, needs to be able to detect it and decode

    $284 (Avg Bid)
    $284 Avg Bid
    5 bids

    ...as following: Key key = generateKey("12345678"); Cipher c = [login to view URL]("DES"); [login to view URL](Cipher.ENCRYPT_MODE, key); byte[] encVal = [login to view URL]([login to view URL]()); I want a DES algorithm implemented code, and its execution time is required to be as same as in JDK. those links may help to understand how des algorithm is working ...

    $207 (Avg Bid)
    $207 Avg Bid
    12 bids

    ...class a { private static final String c = [login to view URL](); Cipher a; Cipher b; public a(String str) { byte[] bArr = new byte[]{(byte) -88, (byte) -101, (byte) -56, (byte) 50, (byte) 86, (byte) 52, (byte) -29, (byte) 3}; try { Key generateSecret = [login to view URL]("PBEWithMD5...

    $409 (Avg Bid)
    $409 Avg Bid
    8 bids

    ...have project to which add, update data in database. We need the shell script which will call the rest api using curl command. The parameter that we send to the api are double byte (Japanese) characters. We also need to validation of the input vs the output generated by the application & store the result in separate log file. Attached one are sample curl

    $27 (Avg Bid)
    $27 Avg Bid
    5 bids

    i receive a message in byte from a mobile phone and i want to print the body of this message in my nodejs server. is an umergency

    $38 (Avg Bid)
    $38 Avg Bid
    8 bids

    Hi Byte S., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $15 (Avg Bid)
    $15 Avg Bid
    1 bids

    ...to update this app since it is several years old. We want it to poll every 10 minutes like it currently does. (Polling time is kept in a modifiable config file so the polling time can be changed.) Polling means it reads a one byte character from a file on our server called code.dat. The character is a number from 1 to 5. If the code goes lower (meaning

    $357 (Avg Bid)
    $357 Avg Bid
    5 bids

    ...kind of problem earlier. Using HC05,arduino uno with Android. Not receiving into Android,using receiver code for Android as below: byte[] buffer = new byte[256]; int bytes; bytes = [login to view URL]().read(buffer); //read bytes from input

    $38 (Avg Bid)
    $38 Avg Bid
    10 bids
    $378 Avg Bid
    1 bids

    ...getting compliments. Roughly API will have these methods:- API 1) Registration (Profile) Profile {String name, String lastName, String email, String phone, String zipcode, byte[] photo, String password, String confirmPassword} Mandate: All Response: userEncrptedKey + StatusCode (SUCCESS / MANDATORY_PARAMETER_MISSING) 2) Profile Update (Profile

    $264 (Avg Bid)
    $264 Avg Bid
    14 bids

    Hi Byte S., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $48 (Avg Bid)
    $48 Avg Bid
    1 bids

    Hi Byte Zappers, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $196 (Avg Bid)
    $196 Avg Bid
    1 bids

    Hi Byte S., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $76 (Avg Bid)
    $76 Avg Bid
    1 bids
    Trophy icon Write some Software Ended

    ...x < width; x++) { Color camColor = [login to view URL](x, y); byte max = [login to view URL]([login to view URL](camColor.R, camColor.G), camColor.B); byte min = [login to view URL]([login to view URL](camColor.R, camColor.G), camColor.B); bool replace = ...

    $45 (Avg Bid)
    Guaranteed
    $45
    1 entries

    ...Text (5 ASCII char) (5 bytes) Right Text (5 ASCIIchar) (5 bytes) State of linear bar, state of curved bar and state of arrows and central LEDs (2 Bytes) Brightness level (1 Byte). General Adjust PWM (10 steps 10%-100%) State requirement. Returns the model and serial number (2 Bytes). CAN BUS Frames is similar but on canbus interfase. Tasks: Microcontroller

    $95 (Avg Bid)
    $95 Avg Bid
    7 bids

    The objective of this projet is to: - Get the data from the Sigfox Backend (we can help you with that). - parse Si...this projet is to: - Get the data from the Sigfox Backend (we can help you with that). - parse Sigfox custom Payload (3 differents frames) depending on the value of the first byte - Format the data in JSON - Send the JSON with POST HTTP

    $858 (Avg Bid)
    $858 Avg Bid
    12 bids

    ...Text (5 ASCII char) (5 bytes) Right Text (5 ASCIIchar) (5 bytes) State of linear bar, state of curved bar and state of arrows and central LEDs (2 Bytes) Brightness level (1 Byte). General Adjust PWM (10 steps 10%-100%) State requirement. Returns the model and serial number (2 Bytes). CAN BUS Frames is similar but on canbus interfase. Tasks:

    $62 (Avg Bid)
    $62 Avg Bid
    8 bids

    ...accessed or read, it should call back a method in user space in a C# application, and include the name of the file, type of operation, and requisite parameters (starting byte index, byte count, etc) - When a file is written, it should call back a method in user space in a C# application, and include the name of the file, type of operation, starting index

    $725 (Avg Bid)
    $725 Avg Bid
    13 bids

    ...accessed or read, it should call back a method in user space in a C# application, and include the name of the file, type of operation, and requisite parameters (starting byte index, byte count, etc) - When a file is written, it should call back a method in user space in a C# application, and include the name of the file, type of operation, starting index

    $653 (Avg Bid)
    $653 Avg Bid
    7 bids

    We have a project where we are communicating with a "Black Box". Before we can communicate with it, the Box sends us a 2-byte token to which we have to respond. The response we send is based on the token the Box sends us. We don't know what the algorithm is that’s used to generate the response. The task is to reverse engineering the algorithm used

    $1426 (Avg Bid)
    $1426 Avg Bid
    11 bids

    Only Bid if you have done similar work in past. Your job is to fill the members of a structure from array of bytes. This array of bytes is stored in one .bin file. But...this : [login to view URL] = arr[0] << 8 | arr[1]; I have attached .bin file and structure format. I just want LOGIC to fill any one of the following structure using array of byte.

    $30 (Avg Bid)
    $30 Avg Bid
    5 bids

    CRC-8 reverse engineer Brute fo...algorithm to calculate checksum. I have the data and checksum but i need a tool that can reverse with a brute force to get the algorithm with correct polynomial etc and 1 missing byte. example of data: 0x4C(CS) 0xF7 0x9F 0x7F 0xFD 0xF9 0xA7 0x3E 0x?? Have al lot of example data to work with. Windows tool or C++ code

    $373 (Avg Bid)
    $373 Avg Bid
    5 bids

    ...something else that is interesting to it. Tell me what you added to the program. TITLE Data Transfer Examples INCLUDE [login to view URL] .data val1 WORD 1000h val2 WORD 2000h arrayB BYTE 10h,20h,30h,40h,50h arrayW WORD 100h,200h,300h arrayD DWORD 10000h,20000h .code main PROC ; Demonstrating MOVZX instruction: mov bx,0A69Bh movzx eax,bx ; EAX = 0000A69Bh

    $71 (Avg Bid)
    $71 Avg Bid
    11 bids

    ...segment and 16 bytes for hash value): SC (4 bytes) Data Segment (252 bytes) HV (16 bytes) For Sender: 1. The sender divides the input plaintext message into contiguous 252-byte data segments and assigns SC to each of them. The sequence counter (SC) value is increased by 1 in increased order (initially SCA = 0). If there are not enough data in the data

    $68 (Avg Bid)
    $68 Avg Bid
    5 bids

    the project control device . my goals is controll 2 parameters the first is time-used and second download byte. when the system is used for the (xx) hour/day or the download data the mobile device.. will be power off. the user can change time-use day or download byte. The project will be on development on c#. The App will be deleted only by password

    $314 (Avg Bid)
    $314 Avg Bid
    4 bids

    This is master window application in c#

    $212 (Avg Bid)
    $212 Avg Bid
    9 bids

    Program cnc arduino. I want help to program a movable xy table. I have tried to google to find similar code and use copy paste I have no programming skills. However time is running away and I am stuck in project. My client have a sushi robot. This machine dropping about 35 pices of nigiri(riceballs)per minute. 1 person is lifting these Nigiri and placing

    $221 (Avg Bid)
    $221 Avg Bid
    7 bids

    Preatshop Load Time Optimisation Prestashop version 1.7.3 Time to first byte on our site is averaging 6+ seconds which is slowing our sites overall load time. We would like this reduced to 1-2 seconds. Our site is listed below and can be run via [login to view URL] to view the wait time (time to first byte). Our site is hosted within Australi...

    $134 (Avg Bid)
    $134 Avg Bid
    9 bids

    ...where the second last byte is a checksum similar to CRC I need to be able to generate a check sum calculation algorithm for new data the first byte is the id of the device the next 4 1/2 bytes relate to the latitude and longitude position the next 3 nibles appear to relate to the battery and number of satellites and the last byte is a checksum or crc

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    4 bids

    ...[login to view URL]([login to view URL], []byte{0x04}) [login to view URL]([login to view URL], []byte{0x00}) [login to view URL]([login to view URL], []byte{0x00}) [login to view URL]([login to view URL], []byte{0x00}) [login to view URL]([login to view URL], []byte{0x00}) [login to view URL]([login to view URL], []byte{0x00}) [login to vie...

    $343 (Avg Bid)
    $343 Avg Bid
    4 bids

    ...management. You should create a large array of bytes to store all songs and artist names. The artist names and song titles will be stored separately. For each record, the first byte (called flag) will be a sign to mark whether the data is active (0 means deleted and 1 means active). The next two bytes will be the (unsigned) length of the record, in (encoded)

    $199 (Avg Bid)
    $199 Avg Bid
    9 bids

    ...management. You should create a large array of bytes to store all songs and artist names. The artist names and song titles will be stored separately. For each record, the first byte (called flag) will be a sign to mark whether the data is active (0 means deleted and 1 means active). The next two bytes will be the (unsigned) length of the record, in (encoded)

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    6 bids

    ...is TBD (currently on paper), but they will be something similar to this one example element: 02= [name="messageName", typedef = [ byte = ID, byte = status, int16 = value1, int16 = value2, int8 = other1, int8 = other2, int8 = other3

    PHP
    $42 (Avg Bid)
    $42 Avg Bid
    9 bids

    I have 2 existing compiled Windows applications for c...Source code available, and unknown as to what they are written in. I need to be able to make some modifications. Both graphically, as well as functional( additional scripted byte write sequences, etc). Would prefer to use existing base applications, but it could be entirely recreated if need be.

    $3655 (Avg Bid)
    $3655 Avg Bid
    9 bids

    ...us how to write related firmware, how to draw PCB antenna, which components to use.. etc. 1) LF BEACON (transmitter) - Only works as 125 KHz LF transmitter - Transmits a 8 byte data, every 100ms - Outer PCB size can go up to 150x120 mm - Range should be configurable between 50 cm to 5 meters (with 50 cm steps). It has to be selected by firmware. Users

    $45 - $378
    $45 - $378
    0 bids

    ...8N blocks of data, where a block is 4096 bytes. Each block will contain a series of records, where each record has 8 bytes. The first 4-byte field is a non-negative integer value for the record ID and the second 4-byte field is a float value for the key, which will be used for sorting. Thus each block contains 512 [login to view URL] job is to sort the file

    $224 (Avg Bid)
    $224 Avg Bid
    11 bids

    My posts like this [login to view URL] Have high wait time on [login to view URL] and High first byte time on [login to view URL] it is around 1.5 seconds. I want to decrease it below 0.5 seconds . Developper must be experienced in speed optimization . He MUST not break website functionality or decrease overall speed . We will have to check

    $181 (Avg Bid)
    $181 Avg Bid
    14 bids