Antenna design jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,005 antenna design jobs found, pricing in NZD

    We are looking for an EE with experience in antenna design and electrmagnetic design that can help us develop an ultra thin profile metal detector. Knowledge of printed electronics a plus.

    $1717 (Avg Bid)
    $1717 Avg Bid
    8 bids

    We are looking for someone to produce 3D files (3d Data (IGES, step, CatPart) for some of our antenna and connector products. The product are 5 different but similar antennas and 2 connectors.

    $230 (Avg Bid)
    $230 Avg Bid
    48 bids

    We require a low-cost flow meter that will work equally well in full, or partially full water pipes and open channels. The device must be able to measure velocity, flow, temperature, and depth. The device will require a Doppler sensor (or some other means) to determine water flow velocity, and a depth sensor to allow the device to calculate the actual water volume (flow rate). In addition, a means...

    $1302 (Avg Bid)
    $1302 Avg Bid
    14 bids

    I need a cst design for a microstrip patch antenna

    $37 (Avg Bid)
    $37 Avg Bid
    6 bids

    I have a board with a PCB trace 13.56 MHz NFC antenna that has a short read distance. Looking for a freelancer who has a Vector Network Analyzer and can tune the NFC antenna on this board to improve the read distance.

    $15 - $46
    $15 - $46
    0 bids

    I have a board with a PCB trace 13.56 MHz NFC antenna that has a short read distance. Looking for a freelancer who has a Vector Network Analyzer and can tune the NFC antenna on this board to improve the read distance.

    $15 - $46
    $15 - $46
    0 bids

    A switchable-frequency slot -ring antenna element for designing for Reconfigurable Array

    $265 (Avg Bid)
    $265 Avg Bid
    1 bids
    Schematic and pcb design 9 hours left
    VERIFIED

    Bluetooth inwall module AC-DC (230V) 2 digital inputs 1 analog input 2 relays (6A) stm32wb55 pcb antenna header pins for flashing

    $209 (Avg Bid)
    $209 Avg Bid
    22 bids

    Hey I am Abhishek, completed my engineering, and my projects in college, I am a kind who able to complete documentation within given time, for me deadline is the most important thing. I done my project "Design of an antenna for UWB applications". I started my project in Jan 2019 and submitted April 2019, I designed the antennas, optimized the designs for better results in order to ...

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    1 bids

    CUSTOMER JOURNEY: 1 - Receives the insert with printed QR code and message to open the camera and live an approach payment experience. 2 - When reading the QR code, it will be directed to the landing page that has the educational videos and highlighted a button to trigger the RA that when triggered appears a message to read the marker that will be printed on the insert blade where the plastic is...

    $863 (Avg Bid)
    $863 Avg Bid
    3 bids

    Can anyone help me on my machine learning Project? Thank you.

    $56 (Avg Bid)
    $56 Avg Bid
    6 bids

    -connect to vhf antenna rasperry pi -collect Ais Data -dedicate location where is rasperry via gps -And streaming all Data (gps And AIS ) via udp port or send data to static IP

    $213 (Avg Bid)
    $213 Avg Bid
    3 bids

    I need some guidance in designing my PCB for Mono pole antenna and helix antenna

    $210 (Avg Bid)
    $210 Avg Bid
    9 bids

    I need to do an electronic design of an antenna using an ublox module. I need someone with experience in designing and developing these nmea modules and instructions. I need to generate files and wiring diagrams for production.

    $349 (Avg Bid)
    $349 Avg Bid
    12 bids

    I am looking for PCB antenna designer. Spec: 915MHz, minimum 2dBi gain You will start off PCB layout, after I check you are aware of the dipole PCB antenna trace size calculation method or handling formula. Thank you.

    $223 (Avg Bid)
    $223 Avg Bid
    14 bids

    For drone Antenna Tx and Base station antenna Rx

    $206 (Avg Bid)
    $206 Avg Bid
    4 bids

    I need someone to design and assemble working prototype of pcb with microcontroller, power circuit, rfid 15.36 mhz chip to communicate with mifare classic and 8 gpio ports, and zigbee chip and antenna. I can help with software but I would need specs from chip manufacturers to understand how to communicate with it. power supply should be 6v , 4 AA battery, conteolled device is a small servo with t...

    $43 (Avg Bid)
    $43 Avg Bid
    7 bids

    company need this requirments for RBS Field Technician in malta shuold be add more in cv and cover latter Job Purpose Maintenance and servicing of equipment related to radio base stations and transmission networks. Key Activities/Responsibilities: Upkeep of BTS sites. To carry out regular maintenance of all RBS sites. To carry out diagnosis and rectification of faults on all BTS equipment. U...

    $27 (Avg Bid)
    $27 Avg Bid
    22 bids

    Please remove the black object (which is the antenna) from the photo, and fill in the space where the black antenna is, with blue sky (to match the blue sky of the photo). Thanks!

    $15 (Avg Bid)
    Guaranteed
    $15
    208 entries

    Circuit design needed. No PCB layout needed, as the packaging is to be determined. Components: - RF module SoC (System on Chip) Sigfox Chip AX-SFAZ - Microcontroller with In Circuit Debug or similar (open to suggestions ) - SMA connected antenna - Battery power supply (open to suggestions) - ADC for either 3.3 or 5v (5v preferred) - Microcontroller driven LED for feedback - ADC reading of a sens...

    $51 / hr (Avg Bid)
    $51 / hr Avg Bid
    37 bids

    See attached for our current logo. We are looking for a new logo design. Our current logo is recognized in our industry, so the new logo should look similar, specifically in regards to the color and font. What we would like to change is the black clip art (supposed to be a tower with antenna dishes) to something more recognizable and maybe a more updated look overall. We are a company that provide...

    $342 (Avg Bid)
    $342 Avg Bid
    105 bids

    Baoji Hanz Material Technology Co., Ltd. is a professional tungsten material manufacturer and supplier located in Gaoxin District, Baoji City, Shaanxi Province. Based on the three pillar industries of Baoji, we mainly produce non-ferrous metal products, petroleum machinery and folk culture products. Our main products are titanium, tungsten and molybdenum pipe, plates, bars and wires. They are wide...

    $880 (Avg Bid)
    $880 Avg Bid
    13 bids

    hi, i want you to connect me with a public domain my controller so i can have access to my antenna from all over the world and make available the social login to my network.

    $29 (Avg Bid)
    $29 Avg Bid
    10 bids

    Hi, I want to design CC1352 based customized RF board. we have a requirement of customized PCB based on TI CC1352 with Dual band RF Antenna PCB Antenna and SPI, UART and has to expose some GPIO's and also integrate e-paper display with this board

    $2494 (Avg Bid)
    $2494 Avg Bid
    13 bids

    need to write 5 pages of case study report based on past IEEE papers published since 2015, the structure (file 1) and format (file 2) of the case study report is attached below

    $95 (Avg Bid)
    $95 Avg Bid
    18 bids

    We need a VERY short range (like 1 inch/2 cm) cell phone signal jammer: it's basically a standard jammer, but the output can be limited to an extremely low wattage with a very small antenna, requiring very little power. It should be SMD based and have a switch to choose between 2G/3G/4G/LTE/HSPA. Finally, it should be powered by one/two 2032 batteries and only work briefly for a few seconds i...

    $239 (Avg Bid)
    $239 Avg Bid
    9 bids

    We are working with EAS anti theft systems for shops and supermarkets. RFID UHF Tags or labels are attached to the goods and if an item is moved out from the shop without the tag/label being removed, a system near the exit of the shop will alarm. We have Android based hardware for the Reading of the tags and labels. The hardware also has GPIO ports, WLAN, Lan, RS232, Bluetooth etc built in. The ha...

    $1761 (Avg Bid)
    NDA
    $1761 Avg Bid
    25 bids

    Looking for medium level PCB Design specialist. Questions: without answers we are not considering you. Existing Tech. Do you use Eagle? Have you ever used HopeRF RFM95 LoRa and made antenna adaption circuit? Are you familiar with low power (<6 uA while sleeping) techniques? Please cite when you used those. Tech 2. What DC-DC do you typically use? Are you experienced with solar nanoharvest cir...

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    7 bids

    See the attached drawing: RP-SMA-female-bkd-on-LMR100-drawing: This project is to modify that drawing, so that the connector will include a flat o-ring that is embedded in the flange. I have attached two examples of what an o-ring embedded in the flange looks like: However, in these examples, the embedded o-ring is rounded. I have attached a photo of a flat o-ring, so that you can see w...

    $46 (Avg Bid)
    Guaranteed
    $46
    14 entries

    Hello I would like to make an alcohol distillation column controller with the option of reading data from the phone. Controller functions: - temperature reading from 4 DS18B20 sensors. - support for 4 motor valves (CWX-25 CR-05 12V) - adjustable every 5 percent - support for 9 kW / 400V heater (three phases) - adjustable every 2.5 percent - wi-fi & bluetooth support To start with, I only ne...

    $307 (Avg Bid)
    Featured
    $307 Avg Bid
    12 bids

    Hi, The project is to do a draft indidsrial design for a cellular antenna (only the outside enclsoute) and generate rendering of teh design mounted on a cellular tower. Thanks, Idan

    $255 (Avg Bid)
    $255 Avg Bid
    33 bids

    Hello Jin, my name is Mark. i would like to hire you for a job that will involve designing circuit and PCB. this will be a consumer product, it has to pass certifications for EU,USA,CHINA market. The product will connect to a wireless access point and get some data from a internet server, then show the output on a 5" CTP screen. i will include the data sheet for the display, that have all t...

    $762 (Avg Bid)
    $762 Avg Bid
    1 bids

    Hello Vladimir, my name is Mark. i would like to hire you for a job that will involve designing circuit and PCB. this will be a consumer product, it has to pass certifications for EU,USA,CHINA market. The product will connect to a wireless access point and get some data from a internet server, then show the output on a 5" CTP screen. i will include the data sheet for the display, that have ...

    $762 (Avg Bid)
    $762 Avg Bid
    1 bids

    Hi, I'm looking for someone to have a quick look at a GNSS Patch Antenna design I have done. Looking for feedback / suggestions to improve signal. I have completed one antenna and it works ok but I'd like suggestions to improve the performance. Can provide gerber file / eagle file / screenshots / Smith Charts. Schematic [login to view URL] Trent

    $47 (Avg Bid)
    $47 Avg Bid
    5 bids

    I need to design a small data collector. No sensors of any kind is need. The data is collected by network using SNMP and sent to a remote server for further processing and storing. I already have a "proof on concept" running in RB pi with code in python. However RB pi is too much for the final product and too expensive for production in medium scale (about 600 units/year). I am not sure ...

    $6000 (Avg Bid)
    $6000 Avg Bid
    27 bids

    i have found this details at the seller so who can do this project ? contact me Skype: live:448215298e1990b8 " ATM Skimming without any physical contact. This Skimmer will work without a physical connection to ATM/POS Machine. This product is our best-seller, and is most popular credit card skimming device Worldwide. This is GSM data receiver – skimmer. It receives credit card data fro...

    $1968 (Avg Bid)
    $1968 Avg Bid
    3 bids

    i want to design step by step antenna by CST program (spiral antenna) by TeamViewer you will describe to me how to design it

    $183 (Avg Bid)
    $183 Avg Bid
    14 bids

    build a GUI interface for an antenna that reports to a position scheduling program

    $1850 (Avg Bid)
    $1850 Avg Bid
    33 bids

    We will build a software for conducting electromagnetics computation, which can be used in industrial microelectronics design and antenna design, which is critically depending on these electromagnetics computation tools.

    $2043 (Avg Bid)
    $2043 Avg Bid
    11 bids

    Antenna design for wearable device medical application. The antenna connect to ardoino Antenna application ( wifi 802.11b or Bluetooth or data collection)

    $762 (Avg Bid)
    $762 Avg Bid
    1 bids

    Must use ADS to Simulating Dipole Antenna Characteristics. Small, easy project, deadline for today. Will give detailed guidance.

    $30 (Avg Bid)
    $30 Avg Bid
    3 bids

    We are implementing an IoT solution for tracking large animals using LoRa networks in tropical mountainous rainforests (with no mobile network connectivity) of an area roughly 600k ha in size. Our solution is comprised of communication between the sensor nodes and the base stations, over the wireless channel utilizing the LoRa physical layer, whilst the connection between the gateways and the c...

    $296 (Avg Bid)
    $296 Avg Bid
    7 bids

    Smart Antenna Systems Model Simulation Design for 3G Wireless Network Systems

    $355 (Avg Bid)
    $355 Avg Bid
    9 bids

    Warning: A non-numeric value encountered in /home1/t3x6i3j0/public_html/[login to view URL] on line 6753 i start inputting new products n am gettign teh above in [login to view URL] where as the old products show s no this error eg [login to view URL] more importantly why does this happen

    $41 (Avg Bid)
    $41 Avg Bid
    38 bids

    Hi All, We have an antenna designed in EAGLE and we would like to simulate the performance using HFSS in ANSYS. We need a lesson. How can we set this up? We supply the EAGLE file. You supply a video showing how this can be imported and simulated in HFSS. 1. You must have your own copy of HFSS 2. EAGLE can open the BRD file. 3. You do NOT need EAGLE to open the DXF file. That can be imported direc...

    $90 (Avg Bid)
    $90 Avg Bid
    9 bids

    We are developing hardware for a small keyfob-like system utilizing a Si4010 / Si4355 combination from Silicone Labs. We use a Si4010/Si4335 915 MHz Key Fob Development Kit (4010-KFOBDEV-915) which uses USB interfaces to the Si4010 and a C8051 which in turn drives the Si4335. The final connection in both cases seems to be a proprietary 2 wire interface. We would like help in two stages. First.....

    $296 (Avg Bid)
    $296 Avg Bid
    7 bids

    I need a reader for 125KHz cards and fobs. Read very carefully: line by line until the end. If you do not know to work with Eagle PCB, no need to apply If you do not know how to calculate and design a PCB antenna, no need to apply. It MUST read card or Key Fob EM4100 format. Must work on 5 volts DC. Output must be UART or WG Wiegand selectable by jumper. Separate led output when a read is complete...

    $374 (Avg Bid)
    $374 Avg Bid
    17 bids
    Trophy icon 3D render of TV ANTENNA Ended

    In this project need to render 3d model of TV Antenna. You can find attached some photos of my opponents. You can try make same way they did or try something new.

    $168 (Avg Bid)
    Guaranteed
    $168
    32 entries

    REAL TIME ANTENNA AZIMUTH ANGLE CONTROL USING QFT.. The system is a Multi Input and Multi Output.(MIMO) SERVO CONTROL SYSTEM. This can be done on MATLAB by using SIMULINK. QFT (Used to design Controller and Pre-Filter) Quantitative Feedback Theory (QFT) is for robust stability, tracking and disturbance rejection. The constraints applied over certain intervals are sensitivity S (jw), Complementary...

    $454 (Avg Bid)
    $454 Avg Bid
    9 bids

    Looking for a skilled person who is capable of designing / making / consulting on a portable Antenna that will be highly powerful to catch all the IMSI number within 10km radius area. In order to complete such a task, the bidder should have strong knowledge of how LTE networks and signalling. Bidder MUST have an understanding of telecommunications and the different cell bandwidths that are curren...

    $724 (Avg Bid)
    $724 Avg Bid
    8 bids